Archive of the former Yahoo!Groups mailing list: The Yamaha AN1x Synthesizer mailing list

Great!

> On 07 May 2015, at 00:26, amustsuccess@... [AN1x-list] <AN1x-list@yahoogroups.com> wrote:
>
>
>
> Hey Ben,
>
> It was my factory default patches. Thanks for helping me out. It worked! I'm elated.
>
> Regards,
> Amos
> Sent from my BlackBerry® smartphone provided by Airtel Nigeria.
> From: "Ben Stuyts ben@... [AN1x-list]" <AN1x-list@yahoogroups.com>
> Sender: AN1x-list@yahoogroups.com
> Date: Wed, 6 May 2015 21:19:53 +0200
> To: <AN1x-list@yahoogroups.com>
> ReplyTo: AN1x-list@yahoogroups.com
> Subject: Re: [AN1x] confused with arpeggiator, chord/norm in split layer.
>
> Were there any custom patches, or were they all the factory defaults? If there were custom patches, you will have lost them forever. But the factory default patches can be easily restored as follows. In this case I would use the “Button [9]” option. (From the Yamaha site:)
>
> Reference: Owner's Manual, p. 94-95
>
> 1) Turn OFF the power.
>
> 2) Press and hold the [7], [8] and [9] buttons down simultaneously while turning ON the power.
>
> 3) Continue to hold the buttons down until a dialog box appears on the screen displaying, 'Factory Set? [1---9]'.
>
> 4) Release the [7], [8] and [9] buttons and choose one of the following resets by pressing the corresponding button:
>
> Button [1]: Loads Voices 1-64.
> Button [2]: Loads Voices 65-128.
> Button [3]: Loads all 128 Voices.
> Button [4]: Loads all Voices sorted by Voice Category.
> Button [5]: Loads User Patterns 1-64.
> Button [6]: Loads User Patterns 65-128.
> Button [7]: Loads all User Patterns.
> Button [8]: Loads system data.
> Button [9]: Loads all Voices, User Patterns and system data (full factory reset).
>
> 5) Press the [YES/ENTER] button. The AN1X will execute the Initialization procedure and return to ‘Play mode'.
>
> Ben
>
> On 06 May 2015, at 17:44, amustsuccess@... [AN1x-list] <AN1x-list@yahoogroups.com> wrote:
> >
> >
> >
> > Oops! I got it two months ago, and didn't know I was to back-up before replacing the battery. Pls, how do I get the same patches back?
> > Sent from my BlackBerry® smartphone provided by Airtel Nigeria.
> > From: "Gerald Raucamp yahoogroups@... [AN1x-list]" <AN1x-list@yahoogroups.com>
> > Sender: AN1x-list@yahoogroups.com
> > Date: Wed, 6 May 2015 15:43:29 +0200
> > To: amustsuccess@... [AN1x-list]<AN1x-list@yahoogroups.com>
> > ReplyTo: AN1x-list@yahoogroups.com
> > Subject: Re: [AN1x] Re: confused with arpeggiator, chord/norm in split layer.
> >
> > I think you're supposed to make a backup of your patches before changing
> > the batteries, just to avoid problems like these. Once the memory is
> > wiped, it's wiped.
> >
> > On Wed May 06 2015, "amustsuccess@... [AN1x-list]" <AN1x-list@yahoogroups.com> wrote:
> > >Hello Folks,
> > >
> > >I need your help asap! I changed the battery in my AN1x synth. At the moment, all my tones are gone. What do I do to get them back? :(
> > >
> > >Warm regards,
> > >Sent from my BlackBerry® smartphone provided by Airtel Nigeria.
> > >
> > >-----Original Message-----
> > >From: "skseanking1@... [AN1x-list]" <AN1x-list@yahoogroups.com>
> > >Sender: AN1x-list@yahoogroups.com
> > >Date: 03 May 2015 10:27:22
> > >To: <AN1x-list@yahoogroups.com>
> > >Reply-To: AN1x-list@yahoogroups.com
> > >Subject: [AN1x] Re: confused with arpeggiator, chord/norm in split layer.
> > >
> > >Layer -> split
> > >arp on
> > >Kbdmode -> chrd&norm
> > >SceneSw -> scene 1 or scene 2
> >
> > --
> > Gerald Raucamp - cavey@...
> > http://www.cavey.nl
> >
> >
> >
> >
>
>
>
>
>