is the an1x sending it in sysex or midi cc if its sending sysex there should be a filter in you other synth were you can switch of sysex recieve
----- Original Message -----
From: Peter Korsten
To: AN1x-list@yahoogroups.com
Sent: Wednesday, July 14, 2010 5:08 PM
Subject: Re: [AN1x] Disable program change MIDI transmission
Op 13-7-2010 22:22, jeromestpierre schreef:
> I cannot find out how to disable the program change MIDI messages that are sent whenever I change the patch number while controlling another synth.
>
> I looked in the manual and I couldn't find anything but I am still skeptical.
>
> Is it possible to turn that off?
Possibly, you would need an external MIDI filter for this. But what sort
of set-up do you have that requires you to change the program, but only
locally? Or are you using the sound engine of both the AN1x and the
external synth?
On my EX5, you can set several zones on the keyboard, and per zone
indicate whether a zone goes to the internal sound engine, MIDI out A,
MIDI out B, or any combination thereof. But program change messages are
still transmitted.
- Peter
------------------------------------------------------------------------------
No virus found in this incoming message.
Checked by AVG - www.avg.com
Version: 8.5.441 / Virus Database: 271.1.1/3003 - Release Date: 07/13/10 18:36:00
[Non-text portions of this message have been removed]