thanks for the psu help ,...J.F you were right!! ,..the psu states i think its 12vdc but was giving a good 16 vdc,..and the wire w the printed line was the + ,......thanks for alll the help ,....it helped me hook up a cool custom eq that was part of a neve 8068 ,...
thanks again!!!!
-----Original Message-----
From: AustinGreen <
austingreen@...>
To:
AN1x-list@yahoogroups.comSent: Wed, Apr 7, 2010 9:58 pm
Subject: [AN1x] Re: MIDI Help
Hi Sorry for the dumb question. Figured it out myself by, get this, reading the manual! So if someone else ever has this problem there is a setting for the "Pattern Transmit Channel" to chose which MIDI channel to send Arp and Seq data on. Page 87 of manual. Mine was set to off by previous owner.
--- In AN1x-list@yahoogroups.com, "AustinGreen" <austingreen@...> wrote:
>
> Hi Group,
> I am trying to send Arp or Seq info to a Korg Poly-800 from my AN1X. I can control individual notes but when I turn on Arp or Seq nothing happens at the Korg. Same with my Foot Switch (Hold/Sustain pedal) it doesn't effect the Korg. Is it the Korg, the AN1X, or me?
> Thanks again.
>
[Non-text portions of this message have been removed]