Hi folks !
i was quite joking but ...
Try to program the ribbon controller, because you have to assign it at 2
parameters in the current patch. If not it does not work, of course, but
this is the default setting of the ribbon. Less likely it may be out, it
is not a very "mechanical" part, but sometimes this can happen on laptop
PCs, why not on an AN1x ?
Do you have the user manual, or better the "AN1x Voice Set-up Guide"
with detailed sound program examples? Try to program one sound from
scratch using this guide and/or the manual. If it is not a real AN1x
you'll meet soon some missing or different parameter(s).
You can go to :
http://www.deepsonic.ch/too At the "AN1x" page you'll find some detailed views of what is inside
an AN1x : open your instrument and compare what you see at home and on
your computer monitor...
Cheers
J.F.
jammie a écrit :
>
>
> it sounds like some one has put a cs3x motherboard into a an1x case
> and passeed it of as a an1x you have been duped send it back to the
> person you brought it from as its not what it says it is
>
> trhats why the ribbon controller does not work
> ----- Original Message -----
> From: Jeff
> To: AN1x-list@yahoogroups.com <mailto:AN1x-list%40yahoogroups.com>
> Sent: Sunday, September 13, 2009 1:07 PM
> Subject: Re: [AN1x] My "new" AN1x is broken... ?
>
> Hello !
> > In test mode it states that it is an "cs3x v0.31" .
> It's curious that the O.S. test mode answers "CS3x"...
> The CS series from Yamaha is completely different from an electronic
> point of view, but the housing is very close to the AN1x, in fact it's
> the same with little difference, mostly the color and some
> knobs/switches. See :
> http://www.vintagesynth.com/yamaha/an1x.php
> <http://www.vintagesynth.com/yamaha/an1x.php>
> Maybe you've got a "croosbreed" between an AN1x (the case) and some CS
> synth (inside)...
> I'm not sure it's possible but it would be funny...
> Cheers
> J.F.
>
> Bobo Wieland a écrit :
> >
> >
> > Hi all,
> >
> > I bought an AN1x second hand and it seems to be broken. I get no
> > sound from the FX-unit at all. The ribbon controller doesn't work and
> > I can't do a factory reset (holding down 7+8+9 send me to test mode).
> >
> > I managed to upload some patches to it, but the patch names doesn't
> > show up correctly and some sounds does not sound like they are
> > supposed to sound.
> >
> > In test mode it states that it is an "cs3x v0.31" . It seems like it
> > is a very early OS in it (Is it an early machine? S/N: 312)? Shouldn't
> > it be v1.04? Any information about this old version and which versions
> > that do exists. Where can I get an upgrade? Will it fix my problems?
> >
> > Please have some information for me! =)
> >
> > mvh
> >
> > Bobo Wieland - Kodstationen AB
> > http://www.kodstationen.se <http://www.kodstationen.se>
> <http://www.kodstationen.se <http://www.kodstationen.se>>
> > -------------------------------------------------
> > Kodstationen AB
> > Järnvägsstationen
> > 262 52 Ängelholm
> > -------------------------------------------------
> > Tel: 0735 - 880 100
> > E-post: bobo@... <mailto:bobo%40kodstationen.se>
> <mailto:bobo%40kodstationen.se>
> > Twitter: http://www.twitter.com/kodstationen
> <http://www.twitter.com/kodstationen>
> > <http://www.twitter.com/kodstationen
> <http://www.twitter.com/kodstationen>>
> > Blogg: http://www.stationsbloggen.se <http://www.stationsbloggen.se>
> <http://www.stationsbloggen.se <http://www.stationsbloggen.se>>
> > -------------------------------------------------
> > Detta e-mail skickades via SilverCRM
> > http://www.silvercrm.se <http://www.silvercrm.se>
> <http://www.silvercrm.se <http://www.silvercrm.se>>
> >
> >
>
> ----------------------------------------------------------
>
> No virus found in this incoming message.
> Checked by AVG - www.avg.com
> Version: 8.5.409 / Virus Database: 270.13.95/2368 - Release Date:
> 09/13/09 17:50:00
>
> [Non-text portions of this message have been removed]
>
>