--- In
AN1x-list@yahoogroups.com, Mibrilane <mibrilane@...> wrote:
>
> Hi there folks.
>
> I get odd response on the AN1x on certain presets when I send it
> controller 74 (Filter Cutoff) controller messages - the whole preset
> will become muted, as though the top filter cutoff level possible is
> somewhere in the 20s. This doesn't happen on the synth by itself, only
> when it is receiving external controller 74 messages.
>
> It also doesn't seem to matter what synth is generating the controller
> 74 messages - either the AN1x knobs or ribbon going through my system
> and coming back to the AN1x, or the Filter Cutoff knob on my E-mu XL-7
> Command Station.
>
> Also, this only happens on certain presets - others respond just fine.
> Does anyone have an idea where I should be looking to change
> parameters on the AN1x to prevent this kind of controller response?
>
>
> Mibrilane
> mibrilane@...
Based upon your problem description, I would conclude there is a conflicting parameter
set in the Ctrl Matrix. Check if there is a Parameter for VCF Cutoff - then check the Source
and Depth values. The Depth value is probably set to a value that is offsetting to the VCF
Cutoff value in the Scene.
Another idea - if your Voice is a Dual Layer, then the VCF Cutoff values for each Scene
might differ substantially where you are not getting the anticipated results.
regards,
Jon