My AN1X syncs to Sonar and is quite low on the MIDI chain (channel 11).
With the LED's flashing and things getting out of sync is your AN1X getting any too much other MIDI info that its not using like sysex ect?
If Cubase has a MIDI output filter/selector it could be worth tweaking that?
Is it only the AN1X thats going out of sync? I lost a lot of hair fine tuning my music PC to sync nicely with the outside world.
Rob.
Jeff <
jf.serviere@...> wrote: Jon a écrit :
>--- In AN1x-list@yahoogroups.com, Ondrash Daree
>wrote:
>
>
>>
>>Hello friends.
>>
>>I have a
>>problem with synchronization between An1x and Cubase SX3.
>>
>>
>Synchronization has lost.
>
>
>>I have set up MIDI TxCh1, RxCh1, TxpatternCh2, Tempo of arpeggio
>>
>>
>as MIDI. When I press Play in SX3 and record MIDI events (I have
>chosen an Arp.preset) AN1x plays with
>
>
>>same tempo like Cubase but without accuracy timing. I have tried
>>
>>
>to record arpeggio
>
>
>>events and they are not aligned to the grid. I have found out,
>>
>>
>that my AN1x LEDs (on a
>
>
>>panel) occasionally blinked. It is strange
Could you help me with
>>
>>
>this issue?
>
>
>>I know that An1x needs good power supply. I use AC adaptor with
>>
>>
>800mA. Is it
>
Hello !
On mine the "scene" LEDs blink sometimes ... don't care , it is not a
failure but more likely a minor bug, it depends on the current patch..
The stock power supply is rated at 12V DC - 700 mA : 800 is enough. In
fact the external supply is only a transformer and a rectifier bridge,
the voltage regulation circuits are inside the synth . And they are (i
think..) reliable . With mostly digital electronics if one voltage is
missing or too low nothing works .
@+
J.F.
>
>
>>OK?
>>
>>
>>
>>Many Thanks.
>>
>>Ondrash
>>
>>
>
>Under the VOICE COMMON menu, set Tempo to MIDI to synchronize the
>Arp/Seq to MIDI Clock from your sequencer. If your suffering from
>drift, try beginning the sequencer a measure or two earlier to allow
>time for the AN1x to 'catch up' and stay in sync.
>
>
>If you are using a multi-port MIDI Interface with many devices, I'd
>suggest you move the AN1x to a higher number port to avoide any
>delay resulting from MIDI slop.
>
>Regards,
>
>Jon
>
>Regards,
>
>Jon
>
>
>
>
>Community email addresses:
> Post message: AN1x-list@yahoogroups.com
> Subscribe: AN1x-list-subscribe@yahoogroups.com
> Unsubscribe: AN1x-list-unsubscribe@yahoogroups.com
> List owner: AN1x-list-owner@yahoogroups.com
>
>Shortcut URL to this page:
> http://groups.yahoo.com/group/AN1x-list
>
>The AN1x Control Synthesizer FAQ::
> http://www.geocities.com/jondl_2000/an1x_faq/an1x_faq_toc.htm
>
>Yahoo! Groups Links
>
>
>
---
avast! Antivirus: message Sortant propre.
Base de donnÚes des virus (VPS): 0641-3, 12/10/2006
Test du: 12/10/2006 23:08:58
avast! - copyright (c) 2000-2006 ALWIL Software.
http://www.avast.comCommunity email addresses:
Post message:
AN1x-list@yahoogroups.com Subscribe:
AN1x-list-subscribe@yahoogroups.com Unsubscribe:
AN1x-list-unsubscribe@yahoogroups.com List owner:
AN1x-list-owner@yahoogroups.comShortcut URL to this page:
http://groups.yahoo.com/group/AN1x-listThe AN1x Control Synthesizer FAQ::
http://www.geocities.com/jondl_2000/an1x_faq/an1x_faq_toc.htm Yahoo! Groups Links
---------------------------------
Now you can scan emails quickly with a reading pane. Get the new Yahoo! Mail.
[Non-text portions of this message have been removed]