<div dir="ltr">Hello all,<div><br></div><div>I'm working up a bi-directional switch module around the TI MUX507 analog switch IC. The datasheet lists the maximum IO current as 30mA. I'd like to proof the switch against the fault condition of having the IO spanning my +/- 12V rails, however remote that mis-connection might be.</div><div><br></div><div>By Ohm's law, the bulk series resistor needed would be 820R 1W, rounding to common values. I imagine that resistance would be high enough to audibly affect pitch CV. Is there a better or more elegant solution to limit the current?</div><div><br></div><div>Thanks,</div><div>-Paul</div><div><br></div><div><br></div></div>