<div dir="ltr">I am building a small motor based "BUG" robot with my son. One of the parts the project calls for i have never seen before..a flashing led or fLED<div><br><div>The text says that if you use a regular led the motor will not work properly (it must somehow be using the FLED as a timer which allows current to flow from the storage capacitors</div><div>to the motor. The text gives no further explanation but it does reference it as a timing element.  Later projects use a hard to obtain part called the 1381 trigger but i would rather use parts I have on hand. </div></div><div><br></div><div><br></div><div><br></div><div>Obviously I could order an FLED but as the datasheets are very sparse I was wondering if anyone has any idea internally how these parts work. Where does the timing mechanism come from?</div><div>I was wondering if even though they are a two leg device..that internally they may have similarities with PUT or UJTS. I have a whole bunch of PUTS around.</div><div><br></div><div>thanks!</div></div>