<div dir="ltr">Hello all, <div><br></div><div>I'm trying to improve my understanding of the trigger and EG logic in the Serge DUSG (<a href="https://sdiy.info/wiki/CGS_Serge_dual_universal_slope_generator">https://sdiy.info/wiki/CGS_Serge_dual_universal_slope_generator</a>). I've read over Tim Stinchcombe's analysis (<a href="https://www.timstinchcombe.co.uk/index.php?pge=vcs">https://www.timstinchcombe.co.uk/index.php?pge=vcs</a>) many times but there's one component he does not touch on and I'm struggling to understand its roll.<br><br>At the trigger input A, after the usual series of conditioning resistors and capacitors, there is a diode conducting the pulse into the LM3900 pin 13. And there is a <i>second</i> diode just below it that leads to (from?) the output of the end-of-cycle comparator - this is the one I'd like to understand.</div><div><br></div><div>Thanks!</div><div><br></div><div>-Paul</div><div><br></div><div><img src="cid:ii_lw3k7uzp0" alt="image.png" width="542" height="226"><br></div></div>