<div dir="ltr">I bought a Roland JV-1080 from someone locally a few years ago and noticed on the back that it showed 100V input power. I read online that the internal transformer has taps for 100V or 120V. It worked fine, but I opened it up and switched one wire on the transformer to "modify" it for 120V and then placed a sticker on the back with the date and info regarding my mod. I wonder if your Yamaha has a similar transformer that has been wired slightly different for US power by someone along the way.</div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Sun, May 12, 2024 at 8:03 PM John Ames via Synth-diy <<a href="mailto:synth-diy@synth-diy.org">synth-diy@synth-diy.org</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">Slightly not-strictly-OT here, I s'pose, but I'm looking for hints/<br>
advice - I've got a Yamaha CS-5 that's mostly in good working order, but<br>
has two (possibly related) issues. One is that there's a slight 60 Hz<br>
buzz from the PSU - it's present even with the mixer sources turned<br>
off, but the filter can remove it. The other is that the output is very<br>
weak; running direct into my recording workstation, the maximum<br>
amplitude is lower than -30dB! Of course I could pre-amplify it...but<br>
then that boosts the AC hum from "not really audible" to "far too<br>
noticeable" :/<br>
<br>
Now, I haven't had it open yet; before I go poking around willy-nilly I<br>
thought I'd ask for any advice, and raise what may well be an important<br>
point. This is, or was, a Japanese import model, and the print on the<br>
back near the power cord lists it as a 100V device - but somewhere<br>
along the line someone covered that over with masking tape and Sharpied<br>
"115V" on it. I've never had problems running 100V equipment on US line<br>
voltages before, but admittedly it's almost all been digital gear; is<br>
that potentially an issue? And someone might have done a mod to adapt<br>
this thing for that already; any ideas what to look for if I open it up?<br>
________________________________________________________<br>
This is the Synth-diy mailing list<br>
Submit email to: <a href="mailto:Synth-diy@synth-diy.org" target="_blank">Synth-diy@synth-diy.org</a><br>
View archive at: <a href="https://synth-diy.org/pipermail/synth-diy/" rel="noreferrer" target="_blank">https://synth-diy.org/pipermail/synth-diy/</a><br>
Check your settings at: <a href="https://synth-diy.org/mailman/listinfo/synth-diy" rel="noreferrer" target="_blank">https://synth-diy.org/mailman/listinfo/synth-diy</a><br>
Selling or trading? Use <a href="mailto:marketplace@synth-diy.org" target="_blank">marketplace@synth-diy.org</a><br>
</blockquote></div>