<div dir="auto"><div><div class="gmail_quote"><div dir="ltr" class="gmail_attr">Tom Wiltshire <<a href="mailto:tom@electricdruid.net">tom@electricdruid.net</a>> skrev:</div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div style="word-wrap:break-word;line-break:after-white-space"><div><br></div><div>Despite what Boss/Roland say about "Interrelations between frequencies are so critical that slight deviation of one frequency can cause beat sound or distortion" in the service manual, I don't believe the frequencies are *that* critical.</div></div></blockquote></div></div><div dir="auto"><br></div><div dir="auto">Perhaps frequencies are not super critical (different Rolands use different sets of frequencies, btw), but the resulting levels in different frequencies (overall spectral content) are somewhat important. The oscillator mix is followed by a bandpass filter on the way to the nonlinear dist-VCA that squashes the frequencies while it applies the amplitude envelope. The signal level coming into this dist-VCA is important to have within reasonable limits, since the dist behavior depends on it. Depending on the oscillator frequencies chosen, different amounts of energy is filtered away by the BPF, with different resulting levels. I imagine that especially the Korg design could be a bit sensitive to this, since ringmodulation sometimes creates very low difference frequencies, where lots of energy would be removed by the BPF. On the other hand Korg uses less filtering IIRC, especially compared to TR-808. :-)</div><div dir="auto"><br></div><div dir="auto">/mr</div><div dir="auto"><div class="gmail_quote"><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">
</blockquote></div></div></div>