<div dir="ltr"><div>In case this message is sent, please ignore it. It's not complete. That was my mistake.</div><div><br></div><div>Regards.<br></div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Sun, Feb 19, 2023 at 2:45 PM A.M. Barrio <<a href="mailto:albertomunozbarrio@gmail.com">albertomunozbarrio@gmail.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir="ltr"><div>Hello, <br></div><div>I'm having an issue where the frequency of my VCO is being affected by the operation of other modules. I'll give a a broader explanation:</div><div><br></div><div>I'm a beginner on synth DIY, right now I have my home made case, a PSU, two VCOs, an LFO, a clock module and an amplifier/speaker (built in the case, not externally). Everything has been arranged by me, I haven't purchased any module yet. The clock and the LFO are the latest modules I have built (pretty much both at the same time), and when I tested them on their own, they worked just fine. However I noticed that when they are powered, the frequency of the VCO would stutter following the operation of the clock and the LFO. <br></div><div><br></div><div>That would be: <b>without connecting the clock or the LFO anywhere</b>, just having them powered up, whenever the clock is up or down, or the waves generated by the LFO reset, the frequency of the VCO varies a tiny bit. It gets more noticeable the higher the pitch of the VCO.</div><div><br></div><div>After some head scratching I've realised that the signals generated by any of the modules I have (both VCOs, the clock and the LFO) are somehow leaking into the +12 and -12 rails of my PSU. Measuring any of the rails on my scope (on AC mode, so only the noise is shown), I can see that the waves generated by the modules I mentioned above are there as well in the form of noise (around 20mVpp each of them). That explains the little variations in frequency of the VCO. However I have no idea why this is happening or how to fix it. I have tried with different PSUs I have around:</div><div><br></div><div><br></div></div>
</blockquote></div>