<div dir="auto">Hey,<div dir="auto"><br><div dir="auto">I'm trying to revive a VCS3 II where the power supply has issues on the negative regulation. With an incoming -25 V it puts out roughly -24 V instead of the supposed -9 V. Does anyone have experience with similar problems?</div><div dir="auto"><br></div><div dir="auto">(The transformer was fried on the negative half, so I'm running it from a bench supply. I have also replaced the regulating 741 and TIP3055 power transistor)</div><div dir="auto"><br></div><div dir="auto">((The <a href="http://phutney.com">phutney.com</a> site and its very readable schematics also magically disappeared, which didn't help)) :-)</div><div dir="auto"><br></div><div dir="auto">Best,</div><div dir="auto"><br></div><div dir="auto">/mr</div><div dir="auto"><br></div></div></div>