<div dir="ltr">I have a dead Lync LN1000 keytar I bought a few years ago, it has been on the back burner during elder care with my aging parents and job relocation.<div><br></div><div>I'm hardly a novice restoring embedded systems but this thing has me stumped.  There's no schematics.  The last time I was in this thing, I repaired the voltage regulator and the unit sometimes worked, then not at all.  I'm powering it from a bench supply not from batteries.  I traced the problem to the master clock on the mcu, nothing there.  Tried replacing the xtal with no luck.</div><div><br></div><div>Now I'm beginning to suspect that I might have installed the wrong xtal.  Where's a good technical resource on mcu crystals?</div><div><br></div><div>Also the mcu is one of those quad leadless packages and I can't for the life of me figure out how to pry the mcu out of its socket.  Need to probe the pins in the socket to confirm power rails and signals.  At the moment I don't have the mcu info in front of me.</div><div><br></div><div>MC</div></div>