<div dir="ltr">If I am understanding correctly, the synth plays fine when you patch from the K-2's own trig out to the trig In? If so, the MIDI To CV seems to be working correctly. I think what has likely happened is that the K-2 trig out is normalized to the trig in, but that the normal pin on the trig-in jack has broken, so now you need to make the connection between the two with a patch cable. This same thing has happened with other Behringer synths like the Model D, it seems that the jacks they use might not have very robust normal pins.<div><br></div><div><br></div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Fri, Feb 18, 2022 at 11:53 AM Joe Frey <<a href="mailto:frey@radioles.com">frey@radioles.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div style="zoom:0%"><div dir="auto">Tx for the response. The synth is seen as a device by the system and my DAW sees it as a midi device on channel 1 which is how I have the dip switches set. I can send midi and it will play midi sounding only if I have a patch cable from kb trig out to trig in.<br></div>
<div dir="auto"> _This is not it's intended function_ It would sound notes using only midi previously. I did not need to make any other CV connections to play notes before.<br></div>
<div dir="auto"> You can see others operating this synth as intended in many vids on the internet.<br></div>
<div dir="auto"> So, it seems to me that the electronics that convert midi to CV are working but no longer connect to the analog gate input.<br></div>
<div dir="auto"> Questions:<br></div>
<div dir="auto"> Is this the appropriate list to ask for help with this?<br></div>
<div dir="auto"> Is there a likely chip that decodes midi to CV?<br></div>
<div dir="auto"> How should I best approach this?<br></div>
<div dir="auto"> Tx. JoeF.<br><br></div>
<div dir="auto">Get <a href="http://www.typeapp.com/r" target="_blank">TypeApp for Android</a> </div>
<div class="gmail_quote">On Feb 18, 2022, at 5:51 AM, "Flügel, Werner" <<a href="mailto:werner.fluegel@b-tu.de" target="_blank">werner.fluegel@b-tu.de</a>> wrote:<blockquote class="gmail_quote" style="margin:0pt 0pt 0pt 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">
<pre>Am 18.02.2022 um 03:39 schrieb Joe Frey:<br><blockquote class="gmail_quote" style="margin:0pt 0pt 1ex 0.8ex;border-left:1px solid rgb(114,159,207);padding-left:1ex"> All, I have a Behringer K-2. It's a copy of a Korg MS-20 with midi, too. <br> The midi has stopped working. If I put a patch cable into the KB input I <br> can hear a pitch and it will change accordingly to the key pressed on <br> midi KB. <br></blockquote><br>Check the MIDI-address: at the back of the Synth are DIP-switches. You <br>must set them according to your keyboard. Check the synth with other <br>keyboards, and the keyboard with another synth (or a MIDI-Monitor <br>running on PC/Laptop)<br><br><blockquote class="gmail_quote" style="margin:0pt 0pt 1ex 0.8ex;border-left:1px solid rgb(114,159,207);padding-left:1ex"> Without the gate patch cable I hear nothing?<br></blockquote><br>No gate, no sound ;-)<br></pre></blockquote></div></div>_______________________________________________<br>
Synth-diy mailing list<br>
<a href="mailto:Synth-diy@synth-diy.org" target="_blank">Synth-diy@synth-diy.org</a><br>
<a href="http://synth-diy.org/mailman/listinfo/synth-diy" rel="noreferrer" target="_blank">http://synth-diy.org/mailman/listinfo/synth-diy</a><br>
Selling or trading? Use <a href="mailto:marketplace@synth-diy.org" target="_blank">marketplace@synth-diy.org</a><br>
</blockquote></div>