<div dir="auto"><div><div class="gmail_quote"><div dir="ltr" class="gmail_attr">Tom Wiltshire <<a href="mailto:tom@electricdruid.net">tom@electricdruid.net</a>> skrev:<br></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div style="word-wrap:break-word;line-break:after-white-space">So does the 3.5mm TRS MIDI not-Standard connect the ground of the TRS lead at both ends, or only one like DIN MIDI? And does it use opto-isolation in the same way?<div><br></div><div>If so, it's basically just a change of connector for something of a smaller size and I don't see any problem with it. If the good features of the original standard also got dropped in the change, that seems like a somewhat retrogressive step.</div><div><br></div><div>While I can see that if everyone was using 3.5mm perhaps it made sense for the standard to reflect that, 3.5mm is alos used for audio input/output on a gazillion devices and people are absolutely bound to try connecting it, just to see if it works. 2.5mm is less common and prevents that to some extent.</div></div></blockquote></div></div><div dir="auto"><br></div><div dir="auto">The specified cable for TRS MIDI is shielded twisted pair, why it kind of makes sense to specify a non-audio-standard connector for it, so that people don't just take any eurorack cable. (Who would do such a thing?)  .-)</div><div dir="auto"><br></div><div dir="auto"><a href="https://www.midi.org/midi-articles/trs-specification-adopted-and-released">https://www.midi.org/midi-articles/trs-specification-adopted-and-released</a><br></div><div dir="auto"><br></div><div dir="auto">There are some interesting passages in the standard actually, it can be downloaded with illustrations on the page above, but some of it in plain text:</div><div dir="auto"><br></div><div dir="auto"><br></div><div dir="auto">"Details:
</div><div dir="auto"><br></div><div dir="auto">(1) Pin-out Correspondence:
</div><div dir="auto">The following TRS to DIN drawing illustrates the wiring for a female TRS connector in comparison to a
</div><div dir="auto">female MIDI-DIN connector (it is expected that devices will use female TRS connectors). 
</div><div dir="auto"><br></div><div dir="auto">Notes: 
</div><div dir="auto">The MIDI In/Out circuitry should be implemented in accordance with the MIDI 1.0 Electrical 
</div><div dir="auto">Specification Update [2014] (MMA/AMEI CA-033). 
</div><div dir="auto">Because TRS connectors are often used for other (non-MIDI) purposes, manufacturers are strongly 
</div><div dir="auto">advised to add protection circuitry (e.g. to handle the case when a DC-coupled headphone driver is 
</div><div dir="auto">connected to a MIDI output).</div><div dir="auto"><br></div><div dir="auto"><div dir="auto">(2) Connector Size:</div><div dir="auto">2.5mm TRS connectors are recommended. </div><div dir="auto"><br></div><div dir="auto">Note: If any other connector size is used, the remainder of this specification still applies.</div><div dir="auto"><br></div><div dir="auto">(3) Cables</div><div dir="auto">All cables shall use shielded twisted pairs, as defined for a MIDI cable.</div><div dir="auto">The following drawing shows how to implement a male TRS to female MIDI-DIN adapter cable:</div><div dir="auto"><br></div><div dir="auto">Notes: </div><div dir="auto">Adapter cables shall have a maximum length of 2 meters.</div><div dir="auto">Direct connection between two TRS-equipped devices using cables designed for use with audio </div><div dir="auto">equipment is not acceptable because the wires are not twisted pair and are typically individually </div><div dir="auto">shielded."</div></div><div dir="auto"></div></div>