<div dir="ltr">Do let us know what you end up deciding on (and why!). It may help someone looking to branch into adjacent areas.</div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Sun, May 2, 2021 at 9:40 AM Richie Burnett <<a href="mailto:rburnett@richieburnett.co.uk">rburnett@richieburnett.co.uk</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">Hi guys and girls,<br>
<br>
Thanks for all your suggestions with this on and off the list.  Some <br>
manufacturer's names are cropping up again and again.  Definitely got some <br>
good leads to look into.<br>
<br>
-Richie,<br>
<br>
<br>
<br>
-----Original Message----- <br>
From: Mike Bryant<br>
Sent: Friday, April 30, 2021 10:40 AM<br>
To: Brian Willoughby<br>
Cc: synth-diy mailing list<br>
Subject: Re: [sdiy] Decent 192kHz USB audio-interface<br>
<br>
> "Then drops like a stone" seems to imply a brick wall filter. Aren't those <br>
> expensive in analog implementations?<br>
<br>
Not really - the combination of capacitors on the input transistor bases, <br>
then on the feedback of every op-amp, then the final RC feeding the ADC are <br>
all set to around 80-100kHz in most designs so as to make sure there's no <br>
response at the bottom of the long-wave radio band.<br>
<br>
Just realised that the hyper-expensive AK4558 has a very extended frequency <br>
response in the slow roll-off mode so add that to the list, not that it's <br>
available at the moment due to the AKM fab fire.<br>
<br>
There's also quite a few 384kHz devices available now, though some seem to <br>
start a slow roll-off at around 48kHz.  Still plenty of response at 80kHz <br>
but definitely not flat.<br>
<br>
<br>
-----Original Message-----<br>
From: Brian Willoughby [mailto:<a href="mailto:brianw@audiobanshee.com" target="_blank">brianw@audiobanshee.com</a>]<br>
Sent: 30 April 2021 01:58<br>
To: Mike Bryant<br>
Cc: synth-diy mailing list<br>
Subject: Re: [sdiy] Decent 192kHz USB audio-interface<br>
<br>
Thanks, Mike.<br>
<br>
"Then drops like a stone" seems to imply a brick wall filter. Aren't those <br>
expensive in analog implementations?<br>
<br>
On that note, if the AFE has a brick wall at 80 kHz, then it's not really <br>
relying on the ADC for the frequency response - at least the ADC isn't going <br>
to be able to be set to 384 kHz sample rate and change the frequency <br>
response much in that regard.<br>
<br>
... not that we're talking about 384 kHz sampling - that would be crazy <br>
talk.<br>
<br>
Brian<br>
<br>
p.s. I'll mention that the Metric Halo Labs interfaces have DC response on <br>
the line level input path to the ADC. They don't maintain DC response on the <br>
mic preamp settings because of phantom power and other aspects of the <br>
microphone preamp stage. The Owners' Manual specifies a response of 1.8 Hz <br>
to 64.7 kHz +0/-1.0dB @ fs = 192 kHz. If you want tighter frequency <br>
response, it's 5.7 Hz to 42.1 kHz +0/-0.1dB at the same sample rate. 0.0005% <br>
THD @ -12 dBFS, 0.0015% THD @ -0 dBFS. I'm not sure which chips they're <br>
using, but it might be the AK4395.<br>
<br>
<br>
On Apr 29, 2021, at 17:15, Mike Bryant wrote:<br>
> Every mic preamp ADC I know of, including several I've designed myself <br>
> which I won't plug here, primarily rely on the ADC itself to set the <br>
> frequency response.  The AFE usually has a 3dB point of around 80kHz or <br>
> higher so as not to affect the overall phase response, then drops like a <br>
> stone to avoid any RF getting to the ADC.<br>
><br>
> Also AKM and Cirrus ADCs seem to stick to a 40kHz bandwidth at 192kHz <br>
> sampling so it may only be ESS or custom equipped units that can do 80kHz.<br>
><br>
> On Thu, Apr 29, 2021 at 6:19 PM Mike Bryant wrote:<br>
>><br>
>> Most high frequency sampling ADCs aren't good to 80kHz.  They have a much <br>
>> more relaxed roll-off to about 40kHz to avoid phase effects on the audio, <br>
>> then dive.  Probably best to look at the ADCs datasheets from AKM, Cirrus <br>
>> and Analog Devices and find an ADC that does what you want, then look for <br>
>> units that use that device.<br>
>><br>
>> -----Original Message-----<br>
>> From: Richie Burnett<br>
>> Sent: 29 April 2021 11:44<br>
>><br>
>> Can anyone recommend a decent external USB audio interface that's capable <br>
>> of sampling at 192kHz in record and playback?<br>
>><br>
>> This is a bit off topic, but it's still audio related! ;-)  Some of my <br>
>> colleagues do underwater acoustic communications work and have been using <br>
>> a "Creative Labs Sound Blaster X-Fi HD 24-bit 96KHz USB Audio Interface" <br>
>> with great success to record and playback ultrasonic signals up to 44kHz. <br>
>> Now they are wanting to do similar up to around 80kHz so I'm looking for <br>
>> an external audio interface capable of sampling at 192kHz with an <br>
>> analogue bandwidth out to around 80kHz.<br>
>><br>
>> The only application I'm aware of that requires this sort of analogue <br>
>> bandwidth is the delivery of composite FM stereo multiplex from studio to <br>
>> transmitter site over IP.  So, I know it is possible, but wanted to avoid <br>
>> buying lots of audio interfaces and testing them to see which are good to <br>
>> 80kHz!<br>
>><br>
>> Any tips/pointers/experience good or bad would be much appreciated.<br>
>> Off-list is fine if high-bandwidth audio is not considered to be of <br>
>> interest to others.<br>
>><br>
>> Many thanks in advance,<br>
>><br>
>> -Richie,<br>
<br>
<br>
<br>
_______________________________________________<br>
Synth-diy mailing list<br>
<a href="mailto:Synth-diy@synth-diy.org" target="_blank">Synth-diy@synth-diy.org</a><br>
<a href="http://synth-diy.org/mailman/listinfo/synth-diy" rel="noreferrer" target="_blank">http://synth-diy.org/mailman/listinfo/synth-diy</a><br>
Selling or trading? Use <a href="mailto:marketplace@synth-diy.org" target="_blank">marketplace@synth-diy.org</a> <br>
<br>
<br>
-- <br>
This email has been checked for viruses by AVG.<br>
<a href="https://www.avg.com" rel="noreferrer" target="_blank">https://www.avg.com</a><br>
<br>
_______________________________________________<br>
Synth-diy mailing list<br>
<a href="mailto:Synth-diy@synth-diy.org" target="_blank">Synth-diy@synth-diy.org</a><br>
<a href="http://synth-diy.org/mailman/listinfo/synth-diy" rel="noreferrer" target="_blank">http://synth-diy.org/mailman/listinfo/synth-diy</a><br>
Selling or trading? Use <a href="mailto:marketplace@synth-diy.org" target="_blank">marketplace@synth-diy.org</a><br>
</blockquote></div>