<div dir="ltr">Using the rails as reference is common, but not a great practice, for the exact reason you mention.  Noise and fluctuations will impact your circuit's behavior.  And particularly for a VCO that's not a great result.  A precision reference (e.g. LM4040-whatever voltage, or a zener, or a decent regulator) is going to get you better stability.  <br><br>Pete</div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Sun, Mar 28, 2021 at 2:42 PM Neil Harper <<a href="mailto:metadata@gmx.com">metadata@gmx.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">so now that I have my own little VCO going on the breadboard, i want to<br>
do a perfboard module with it for my system. so now I'm thinking about<br>
how this VCO will remain stable in a system where the rails might be<br>
fluctuating.<br>
<br>
the first issue i see is that my LM311 comparator takes a reference<br>
voltage drawn from my +15V rail through a resistor to set the trip<br>
point. if that +15V waivers, so will my trip point.. and so will my<br>
frequency. so should things like that be derived from an onboard<br>
reference instead? is this common practice?<br>
<br>
I see in schematics like the ENS-76 VCO (<br>
<a href="http://www.synthsource.com/ens76/vcofig6.jpg" rel="noreferrer" target="_blank">http://www.synthsource.com/ens76/vcofig6.jpg</a> ) that the comparator<br>
reference is just taken from the rail (through R13, R14 divider). Same<br>
with Thomas Henry's VCO-1's, lots of references right off the rails.<br>
<br>
<br>
<br>
<br>
--<br>
/// Neil Harper<br>
/// Every Wave is New Until it Breaks<br>
<br>
_______________________________________________<br>
Synth-diy mailing list<br>
<a href="mailto:Synth-diy@synth-diy.org" target="_blank">Synth-diy@synth-diy.org</a><br>
<a href="http://synth-diy.org/mailman/listinfo/synth-diy" rel="noreferrer" target="_blank">http://synth-diy.org/mailman/listinfo/synth-diy</a><br>
Selling or trading? Use <a href="mailto:marketplace@synth-diy.org" target="_blank">marketplace@synth-diy.org</a><br>
</blockquote></div>