<div dir="ltr">Hi all,<br><br>I don't have much experience with organs using top octave generators or TDA divider/keyer chips, so this issue I was working on had been new for me and I thought I'd document it here. <br><br>A customer brought me an Opus 3 that needed a bunch of TLC on the front panel controls, envelope triggering issues, and octaves 1 and 3 had a sub octave mixed in. Octaves 2 and 4 were fine. I didn't find anything online about the same problem, but when reading up on the TDA1008 I saw Florian had a similar issue in 2008 on a Crumar Performer:<br><br><a href="http://synth-diy.org/pipermail/synth-diy/2018-August/169555.html">http://synth-diy.org/pipermail/synth-diy/2018-August/169555.html <br></a><br>This was the same issue I ended up having. The keyboard drive/trigger circuit had failed and was being held too high, except for C keys that would trigger a pulse correctly. The kind of fluke from the keyer chip for the C keys w/ an oxidized socket - it went away when reseated.<br><br>Q1 3904 and U13 LM358 were both bad, so replacing those fixed the suboctave issue and the triggering problems. Not entirely true - the envelopes were a bit flaky until replacing the sockets someone put in there in the 90s. After new sockets and CMOS they work well.  <br><br>Just thought I'd share! Interesting synth/organ with a nice mix of ideas (and now rare parts) under the hood. <br><br>Nathan</div>