<p dir="ltr" style="margin-top:0; margin-bottom:0;">Don't look for shortcuts when it comes to CV. Get decent 16 bit ADC/DAC. They are dirt cheap now. And I mean decent, because many new 16bit converters have 13-bit linearity  and sometimes even only 10-bit.</p>
<p dir="ltr" style="margin-top:0; margin-bottom:0;">Might be a challenge if you require THT though.</p>
<br>
<p dir="ltr" style="margin-top:0; margin-bottom:0;">Roman</p><br><br>---- Użytkownik Jean-Pierre Desrochers napisał ----<br><br>Hi list,<br><br><br><br>I'm working on a new module for my DOTCOM modular.<br><br>It would memorize incoming CV's and Gate's state for 2msec up to 10sec <br><br>then spit the stream in steps of 1msec.<br><br>The code for Gate memorizing is done.<br><br>I'm now wondering if using a Microchip PIC 10bits ADC is<br><br>linear enough to read incoming CV values (0 to 8vdc)...<br><br>There will be an input buffer amplifier that will take care<br><br>of taking down the 0to8vdc to 0to5vdc for the PIC.<br><br>Incoming CV's 0-8vdc, 12 semitones/octaves.. that makes 1024 / (8 x 12)..<br><br>around 10 steps between each semi-tones.<br><br>My worry is the PIC ADC linearity precision..<br><br>The 10bits memorized values will be output using a 12bits SPI DAC.<br><br>I have a bunch of old PIC16F88 that I want to utilize here.<br><br>Old but still usable for SPI.<br><br>What do you think about PIC's ADC linearity wise ?<br><br> <br><br>JP<br><br><br><br>_______________________________________________<br><br>Synth-diy mailing list<br><br><a href="mailto:Synth-diy@synth-diy.org">Synth-diy@synth-diy.org</a><br><br><a href="http://synth-diy.org/mailman/listinfo/synth-diy">http://synth-diy.org/mailman/listinfo/synth-diy</a><br><br>Selling or trading? Use <a href="mailto:marketplace@synth-diy.org">marketplace@synth-diy.org</a><br><br>