<div dir="ltr">Hello John,<div>The white noise circuit you linked to is a standard concept. A reverse-biased junction will generator noise and the rest of the circuit is there to amplify it to the required levels. There's no particular reason for this circuit to not work on 5V, provided you change the opamps to a modern rail-to-rail model. The levels were calculated for the modular standards so they are probably higher than your device will need anyway, so I see no harm done here.</div><div><br></div><div>As for power, this was designed for a linear supply and it will probably not be best suited to handle high-frequency noise or too much ripple. Since your power consumption is not that high, you can get away with small transformers. Perhaps one for the positive rails and one for the negative, or a centre-tapped one for all three of them. Any  common linear dual voltage PSU schematic will do, just change the regulators accordingly (and verify the power dissipation while you're at it, to be on the safe side).</div><div><br></div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Fri, Oct 23, 2020 at 3:46 AM John Ames <<a href="mailto:commodorejohn@gmail.com">commodorejohn@gmail.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">A few years ago, I salvaged the percussion generator board from an old<br>
cheapo Kimball organ that gave up the ghost a couple weeks after<br>
someone "thoughtfully" donated it to our church. I've had it kicking<br>
around as one of my "one of these days..." projects ever since, but<br>
now I'm working on a piece that I'd actually like to use it in - I<br>
want those old-school Mini Pops beats, but it seems like every modern<br>
analog drum machine inevitably uses the 808 as its point of reference,<br>
sonically.<br>
<br>
Fortunately, I was able to acquire a copy of the service manual for<br>
the organ on the cheap, and it has a nice clean foldout for the board<br>
with schematics and layout clearly documented. From this, I confirmed<br>
that *almost* everything about the rhythm section is done on the one<br>
board, which bodes well. The only things it needs aside from external<br>
triggers are a white-noise source and a power supply; the output<br>
signal is preamped before it leaves the board. It seems like it should<br>
be *fairly* simple to turn it into a standalone drum machine, but I<br>
have a couple questions as low-level electronics is not my strong suit<br>
(my experience is limited to light repair/soldering and wiring up<br>
passive circuits e.g. guitar stuff) and I'd really like to not<br>
accidentally smoke this board that I only have the one of.<br>
<br>
First, the power supply. Is it relatively simple to take, say, one of<br>
those generic Meanwell switching PSUs and filter the outputs until<br>
they're suitable for audio purposes, or should I be looking at a<br>
different solution? The board itself requires +5v, -12v, and +15v,<br>
plus whatever is required by the noise source on top of that. What's a<br>
relatively quick-'n-easy way to get a halfway-decent clean signal to<br>
these connectors?<br>
<br>
Second, the noise source. Unfortunately, this was part of a custom IC<br>
on one of the other boards that I didn't save, and there's no<br>
information on what kind of maximum levels are expected to come in on<br>
that line; fortunately, there's a trimmer to adjust it. It's possible<br>
for all I know that the internal implementation was just basic<br>
shift-register noise, but while I'm going to the trouble to hack up a<br>
project out of this, I might as well do a proper one. MFOS has what<br>
looks like a pretty simple design at<br>
<a href="http://musicfromouterspace.com/analogsynth_new/EXPERIMENTERBOARD/page7.html" rel="noreferrer" target="_blank">http://musicfromouterspace.com/analogsynth_new/EXPERIMENTERBOARD/page7.html</a><br>
but that'd also require +12v from the PSU...interested to hear other<br>
suggestions.<br>
<br>
Attached is the schematic for the rhythm board, if anyone's<br>
interested. It looks like the maraca and cymbal sounds are actually<br>
the same circuit with two different trigger inputs; the service<br>
manual's diagram for the pre-programmed beats seems to indicate that<br>
the maraca sound is just produced by rapid re-triggering. Might even<br>
be able to coax a guiro-type sound out of it if you ramped up the<br>
trigger rate from slower to faster...<br>
_______________________________________________<br>
Synth-diy mailing list<br>
<a href="mailto:Synth-diy@synth-diy.org" target="_blank">Synth-diy@synth-diy.org</a><br>
<a href="http://synth-diy.org/mailman/listinfo/synth-diy" rel="noreferrer" target="_blank">http://synth-diy.org/mailman/listinfo/synth-diy</a><br>
</blockquote></div>