<div dir="auto">Hello, <div dir="auto"><br></div><div dir="auto">I have two questions on the saw core in the JH Living VCO design, if anyone can help.</div><div dir="auto"><br></div><div dir="auto">1. Resistors R17/R18 in series with the capacitor on the integrator: R18 is marked as being a trimmer for high frequency tracking. Any idea how that works? My guess is it prevents the op-amp output resetting all the way to zero, and more so at higher frequency, and thus a shorter journey back up to the trigger point of the comparitor. So it counteracts the tendency to flat at higher frequency by reducing the amplitude --- is this right?</div><div dir="auto"><br></div><div dir="auto">2. What is the purpose of D15?</div><div dir="auto"><br></div><div dir="auto">See: <a href="http://jhaible.com/legacy/living_vcos/living_vcos_sch_1of4.pdf">http://jhaible.com/legacy/living_vcos/living_vcos_sch_1of4.pdf</a></div><div dir="auto"><br></div><div dir="auto">Linked from:</div><div dir="auto"><a href="http://jhaible.com/legacy/living_vcos/jh_living_vcos.html">http://jhaible.com/legacy/living_vcos/jh_living_vcos.html</a></div><div dir="auto"><br></div><div dir="auto">Thank, Liam</div></div>