<p dir="ltr" style="margin-top:0; margin-bottom:0;">Current mirror will only move the problem of coping with diode drop from gnd to plus rail</p>
<br>
<p dir="ltr" style="margin-top:0; margin-bottom:0;">Roman</p>
<br>
<p dir="ltr" style="margin-top:0; margin-bottom:0;">---- Użytkownik Aaron B. napisał ----</p>
<br>
<p dir="ltr" style="margin-top:0; margin-bottom:0;">> This will invert the polarity of the CV, but if that isn't a big deal -</p>
<p dir="ltr" style="margin-top:0; margin-bottom:0;">> drive the OTA through a current mirror. The PIC's output will sink</p>
<p dir="ltr" style="margin-top:0; margin-bottom:0;">> current through a programming resistor at the mirror's input;</p>
<p dir="ltr" style="margin-top:0; margin-bottom:0;">> the mirror's output then sources Iabc to the OTA.</p>
<p dir="ltr" style="margin-top:0; margin-bottom:0;">> </p>
<p dir="ltr" style="margin-top:0; margin-bottom:0;">>  </p>