<div dir="ltr"><div dir="ltr"><br></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Wed, Sep 16, 2020 at 8:06 AM Roman Sowa <<a href="mailto:modular@go2.pl" target="_blank">modular@go2.pl</a>> wrote:</div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">
2. if you really want to go that way, there are full-contained power <br>
boosters, even making +/-15V out of 5V, in a form of small SIP device, <br>
or even SMD chip. Just add some additional filtering and you're done. It <br>
will have noisy output, but it's so easy to have whatever voltage <br>
converter nowdays.<br></blockquote><div><br></div><div>Be warned that they're not all especially great. <br><br>I once built someone else's project powered by USB that used a TC7660 to get bipolar power.  It was basically a computer controlled 8 CV generator, nothing with MIDI, but I found that if I had more than 2 or 3 sliders up toward the 5V side, the overall voltage sagged badly -- and this was without any real load on the outputs.  I was able to improve it by using a higher spec part, the TC7660H, and adding some capacitance for the buck converter, but I was never really happy with it, so it's never gotten much use.</div><div><br></div><div>So it's probably obvious practice, but you'll want to test your circuit under varied output values if you're using one of those chip converters.<br><br>Pete</div></div></div>