<div><div dir="auto">I took a quick look at the datasheet for the Vishay 1N4732 and if i read it right it seems the dynamic resistance around 1mA current is 500 Ohm so quite a bit of voltage variation with current is expected when current is low. </div></div><div dir="auto"><br></div><div dir="auto">The nominal voltage is achieved with current of 53mA. </div><div dir="auto"><br></div><div dir="auto">So I don’t think the devices David has are out of spec - it’s just that the spec isn’t what he wants it to be.  </div><div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Tue, 30 Jun 2020 at 21:59, <<a href="mailto:mskala@ansuz.sooke.bc.ca">mskala@ansuz.sooke.bc.ca</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">On Tue, 30 Jun 2020, Tom Wiltshire wrote:<br>
> I saw a conversation recently on DIYStompboxes about the zener regulation<br>
> inside an old phaser pedal. It was similarly producing a voltage much lower<br>
> than expected. It was pointed out that the circuit was running it at around<br>
> 0.5mA, and the zener was spec’d at 10mA.<br>
> Could this affect your circuit too? By my reckoning, your test with 15V /<br>
> 3K3 is only running a bit over 3mA through the zener. How much current does<br>
> it need to meet the spec?<br>
<br>
That's be my thought as well.  Common Zener diodes havea soft knee in<br>
their voltage/current curves; they're rated for a voltage at some<br>
specified current which is often pretty high, and in effect they have a<br>
lower Zener voltage if you run them at lower current.  I had to do a fair<br>
bit of experimentation to choose the right diodes for my Fixed Sine Bank<br>
design in particular because it's using Zeners "off-label" as it were,<br>
inside op amp feedback loops at a much lower current level than the data<br>
sheet nominal value.<br>
<br>
-- <br>
Matthew Skala<br>
<a href="mailto:mskala@ansuz.sooke.bc.ca" target="_blank">mskala@ansuz.sooke.bc.ca</a>                 People before tribes.<br>
<a href="https://ansuz.sooke.bc.ca/" rel="noreferrer" target="_blank">https://ansuz.sooke.bc.ca/</a><br>
_______________________________________________<br>
Synth-diy mailing list<br>
<a href="mailto:Synth-diy@synth-diy.org" target="_blank">Synth-diy@synth-diy.org</a><br>
<a href="http://synth-diy.org/mailman/listinfo/synth-diy" rel="noreferrer" target="_blank">http://synth-diy.org/mailman/listinfo/synth-diy</a><br>
</blockquote></div></div>