<div dir='auto'>Cool! Might want to double check how your transistors are biased. Korg 35 style has them biased in reverse saturation mode, so voltage at the base should be higher than the collectors. </div><div class="gmail_extra"><br><div class="gmail_quote">On Apr 8, 2020 06:34, Richie Burnett <rburnett@richieburnett.co.uk> wrote:<br type="attribution" /><blockquote class="quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><p dir="ltr">Neat!  Do you get much control feed-through at the BP and LP outputs of the  <br>
filter due to the BE currents of the transistors feeding into the  <br>
integrators? <br>
<br>
-Richie, <br>
<br>
<br>
-----Original Message-----  <br>
From: Chris McDowell <br>
Sent: Wednesday, April 08, 2020 9:03 AM <br>
To: *SYNTH DIY <br>
Subject: [sdiy] low voltage svf with bjts <br>
<br>
<br>
Howdy list, <br>
<br>
I hope every is feeling alright! So I thought why not try to do a state  <br>
variable with bjts, kind of like the early ms20. One reason why not is that  <br>
I don't completely understand how to, but I have gotten this working pretty  <br>
well, and it will simulate down to a supply voltage of 3.3V. <br>
<br>
I took a working filter I've been playing with at 3.3V, and just as a start,  <br>
almost a joke, just swapped the OTAs for NPNs. the outputs surprisingly  <br>
still looked like a filter, but this is kind of clearly not right. <br>
<br>
I've left the exponential converter and the two transistors (Q7 and Q8)  <br>
connected naively, as that's what I have now. What would be the right way to  <br>
connect these two sections? Q9 is not delivering the ~70uA that it would  <br>
into an OTA or dummy load, possibly obviously. This technically works but  <br>
the range is very limited, about a 1:10 change in current / cutoff  <br>
frequency. <br>
<br>
The point of this I suppose would an easily controllable alternative to  <br>
twin-t drums, with very low parts count. Plus, JLCPCB.com assembly service  <br>
is currently out of LM13700s... so I ended up here. <br>
<br>
Cheers, <br>
Chris <br>
<br>
<br>
<br>
<br>
<br>
Virus-free. www.avg.com <br>
<br>
<br>
<br>
<br>
<br>
_______________________________________________ <br>
Synth-diy mailing list <br>
Synth-diy@synth-diy.org <br>
http://synth-diy.org/mailman/listinfo/synth-diy  <br>
<br>
_______________________________________________ <br>
Synth-diy mailing list <br>
Synth-diy@synth-diy.org <br>
http://synth-diy.org/mailman/listinfo/synth-diy <br>
</p>
</blockquote></div><br></div>