<div dir="ltr"><div dir="ltr"><div dir="ltr">I made bus boards that I am happy with: <a href="https://github.com/mattip123/Eurorack-Bus-board">https://github.com/mattip123/Eurorack-Bus-board</a></div><div>And also a simple linear PSU with LM317/LM337 that I find low noise: <a href="https://github.com/mattip123/PSU-Matti">https://github.com/mattip123/PSU-Matti</a></div><div>Maybe it can be of help if you use KiCad and want a starting point.</div><div><br></div><div>/matti</div></div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Tue, Jan 28, 2020 at 8:12 AM Brian Willoughby <<a href="mailto:brianw@audiobanshee.com">brianw@audiobanshee.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left-width:1px;border-left-style:solid;border-left-color:rgb(204,204,204);padding-left:1ex">If you’re going to the trouble of making custom bus boards, why not just put a few extra parts on there and make a power supply? Grab a book that covers audio power supplies.<br>
<br>
Lately, I’ve been favoring external wall warts that output AC instead of the typical DC. I then use the simply two-conductor barrel connector to feed a bog standard linear regulator. If you need multiple voltages, pull them all off the same leg.<br>
<br>
<br>
I just bought a 7U by 104HP case myself, so I’m just getting started designing my own 1U modules. I’m still new myself, but it seems that 1U is typically 5V-powered, and intellijel seem to have simpler 2-wire 5V supply cables and connectors for the same on their power supplies. Then again, I may be missing something.<br>
<br>
Brian<br>
<br>
<br>
On Jan 27, 2020, at 9:51 PM, Didier Leplae via Synth-diy <<a href="mailto:synth-diy@synth-diy.org" target="_blank">synth-diy@synth-diy.org</a>> wrote:<br>
> <br>
>> How are you handling distribution? <br>
> <br>
> I was considering making some custom bus boards as well, just to save $$. <br>
<br>
<br>
On Mon, Jan 27, 2020 at 10:28 PM Didier Leplae via Synth-diy <<a href="mailto:synth-diy@synth-diy.org" target="_blank">synth-diy@synth-diy.org</a>> wrote:<br>
> I hope this question hasn't been covered ad nauseam in the past but here goes...<br>
> <br>
> I built a custom case for Eurorack that is 84 hp wide. <br>
> It has 7 "normal" rows plus a 1u row. (I guess that makes a total of 672 hp)<br>
> <br>
> I have roughly figured I will need a power supply with @ 3A for +12V and 2A for -12V. (The 5V seems to be hardly used and yet the power supplies I've looked at have an overabundance, probably 1A would be plenty )<br>
<br>
<br>
_______________________________________________<br>
Synth-diy mailing list<br>
<a href="mailto:Synth-diy@synth-diy.org" target="_blank">Synth-diy@synth-diy.org</a><br>
<a href="http://synth-diy.org/mailman/listinfo/synth-diy" rel="noreferrer" target="_blank">http://synth-diy.org/mailman/listinfo/synth-diy</a><br>
</blockquote></div>