<div dir="ltr"><div>That could be it, Tony. The oscillator in the example pics is still charging in the wrong direction when the sync pulse comes in.</div><div><br></div><div>Jürgen Haible's recently mentioned Dual VCO comes to mind... what's he doing there with that pin 9 of the lower 3340? Sniffing the soft sync input pin in order to check the state of the internal tri-core comparator?</div><div><a href="http://jhaible.com/legacy/tonline_stuff/hj2vco.gif">http://jhaible.com/legacy/tonline_stuff/hj2vco.gif</a><br></div><div><br></div><div>/mr</div><div dir="ltr"><br></div><div dir="ltr">On Tue, 21 Jan 2020 at 09:59, Oakley Sound via Synth-diy <<a href="mailto:synth-diy@synth-diy.org">synth-diy@synth-diy.org</a>> wrote:<br></div><div class="gmail_quote"><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">I'm probably completely on the wrong track; but the 3340 is a triangle <br>
core oscillator - there's a triangle waveform on that capacitor. If you <br>
short it at certain points on the waveform maybe something weird happens <br>
like an overshoot. Normally when you do sync on a triangle core <br>
oscillator you have to force the comparator too.<br>
<br>
So take a look on the triangle output and see what's actually doing <br>
before the waveform goes to the tri to saw convertor.<br>
<br>
Tony<br>
<br>
<a href="http://www.oakleysound.com" rel="noreferrer" target="_blank">www.oakleysound.com</a><br>
_______________________________________________<br>
Synth-diy mailing list<br>
<a href="mailto:Synth-diy@synth-diy.org" target="_blank">Synth-diy@synth-diy.org</a><br>
<a href="http://synth-diy.org/mailman/listinfo/synth-diy" rel="noreferrer" target="_blank">http://synth-diy.org/mailman/listinfo/synth-diy</a><br>
</blockquote></div></div>