<div dir="ltr"><div dir="ltr"><br></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Tue, Jan 7, 2020 at 10:16 PM Quincas Moreira <<a href="mailto:quincas@gmail.com">quincas@gmail.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir="ltr">Yes, Yusynth and MFOS modules for example use such protection, and I can vouch that it does work, as I've burned a few myself when starting out due to inverted opamps. The 10R burned before anything else could be damaged on the boards. Erica Synths uses resetable fuses for the same purpose and it's a better solution since you don't then have to replace the fuse, it just interrupts the flow when excessive current is drawn, but doesn't burn out.</div></blockquote><div><br></div><div>"Usually".  I've seen it done :-D   By others in this particular case.  The board was in such bad shape by the time I saw it, I have no idea what they did to melt the PTC fuse.<br><br>The problem I have with the 10R solution is that if it's a VCO and it draws any significant current *and* uses the rails for reference (which a lot of those using this method seem to do), it can lead to an unstable VCO.  It doesn't take much to be audible, and I have encountered this with "real" designs in the DIY space.</div><div><br></div><div>Pete<br><br></div><div><br></div></div></div>