<div dir="ltr"><div dir="ltr">On Fri, 3 Jan 2020 at 02:48, ColinMuirDorward <<a href="mailto:colindorward@gmail.com">colindorward@gmail.com</a>> wrote:<br></div><div class="gmail_quote"><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir="ltr"><div>Ooops, it's just an artifact of setting my scope to ac coupled input. <br></div><div>Sorry folks.</div><div>Colin<br></div></div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Thu, Jan 2, 2020 at 4:48 PM ColinMuirDorward <<a href="mailto:colindorward@gmail.com" target="_blank">colindorward@gmail.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex"><div dir="ltr"><div>Is it a shortcoming of all my 3340 designs, or is PWM supposed to do a DC offset, as well? <br></div><div>So at the smallest duty cycle, I get 0 to +10v, and at the other end, I get 0 to -10v. <br></div><div>At 50% duty is -5v to +5v.</div></div></blockquote></div></blockquote><div><br></div><div>AC coupling the scope (or audio device input) removes the DC offset that is an actual part of a non-50/50 % pulse wave. I guess we all regularly mistake it for moving the signal up and down. :-)</div><div><br></div><div>Keeping the pulse wave tops & bottoms at constant voltages (i.e., keeping the PWM DC offset) is often desired for several reasons such as further signal treatment/modulation or just keeping the control of the signal peaks. But it could have some drawbacks as well: The DC offset created in the pulse wave essentially equals the PWM CV. Modulate the PWM quickly, and the modulation is potentially heard as well.</div><div><br></div><div>I have removed the DC-offset (actually by subtracting the PWM CV, not by AC-coupling - caps are big and expensive) of pulse waves in oscillator designs in order to avoid audible thumps or tones when quickly changing the PW setting by changing presets or modulating it heavily. When doing this it's important that the CV is not noisy, because it is heard in the resulting signal. </div><div><br></div><div>Happy new 20/20 pulse waves!</div><div><br></div><div>/mr</div></div></div>