<HTML><HEAD></HEAD>
<BODY dir=ltr>
<DIV dir=ltr>
<DIV style="FONT-SIZE: 12pt; FONT-FAMILY: 'Calibri'; COLOR: #000000">
<DIV>Hi Everyone,</DIV>
<DIV> </DIV>
<DIV>We need an experienced analog synth design engineer for contract work on a
specific commercial project. Renumeration will be attractive and further work
will be available down the line. </DIV>
<DIV> </DIV>
<DIV>The ideal candidate knows classic discrete analog synth circuit designs in
and out, and should also know everything there is to know about ASICs such as
SSM and Curtis chips. The candidate should also ideally have some experience
with analog effects designs such as phasers, flangers, BBD delays etc.</DIV>
<DIV> </DIV>
<DIV>The project is at the concept stage and a number of design parameters have
been locked down as the product has an already defined feature set and styling.
</DIV>
<DIV> </DIV>
<DIV>The deliverables on the part of the design engineer sought is a fully
working, tested and refined final design synthesizer circuit on prototyping PCB
such as perf/strip board where controls such as pots and switches can be on a
provisional front panel or enclosure. The required documentation to accompany
this are complete and clear schematics, a BOM and any other information about
the circuit that manufacturing engineers need in order to produce the
product.</DIV>
<DIV> </DIV>
<DIV>We’re UK based, but don’t let that put you off if you’re not. Interested
applicants should email me directly at my Synth-DIY list address <A
href="mailto:jorn_bilse@yahoo.co.uk">jorn_bilse@yahoo.co.uk</A></DIV>
<DIV> </DIV>
<DIV>Best regards,</DIV>
<DIV>Jorn Bilse</DIV>
<DIV> </DIV></DIV></DIV></BODY></HTML>