<div><div dir="auto">The thinner gauge wire actually has more resistance.  I one tried using cut up midi cables for power feeds (they were nice and supple unlike other cables I'd made) and it was a while before I realized the nose/stability issues I was having were due to the cables.</div></div><div><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">On Thu, Aug 15, 2019 at 11:48 PM Youssef Menebhi <<a href="mailto:youssef.menebhi.79@gmail.com">youssef.menebhi.79@gmail.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">Well, I tested one more time - this time with a ground lift on the power supply.<br>
That did it. Looks like you were right all along, Oren!<br>
<br>
On Fri, Aug 16, 2019 at 12:43 AM Youssef Menebhi<br>
<<a href="mailto:youssef.menebhi.79@gmail.com" target="_blank">youssef.menebhi.79@gmail.com</a>> wrote:<br>
><br>
> Thanks for the suggestions so far - I poked around a bit and it helped<br>
> to know what you would have considered.<br>
> Having taken a closer look, I noticed that the hum was definitely<br>
> originating with the power supply. I tightened up the screws on the<br>
> transformer, which improved things about 50%. Still, oddly, the<br>
> thinner gauge cable seems to produce less hum.  I'm pretty certain<br>
> it's not a ground loop issue, at this point - since I've tried<br>
> multiple modules, independently.<br>
><br>
> On Thu, Aug 15, 2019 at 11:26 PM Oren Leavitt <<a href="mailto:obl64@ix.netcom.com" target="_blank">obl64@ix.netcom.com</a>> wrote:<br>
> ><br>
> ><br>
> > On 8/15/19 9:45 PM, Youssef Menebhi wrote:<br>
> > > Hi everybody,<br>
> > ><br>
> > > I've been building my own circuits for a little while now and have<br>
> > > just switched to a new power supply/connector arrangement. I use<br>
> > > bipolar power, plus and minus 12v.  What I've noticed, though, is that<br>
> > > when I use headphone cable (shielded ground) to pass power, I get a<br>
> > > small hum at the output. When I use even thinner gauge cable, I don't<br>
> > > get hum. Unfortunately, it's hard to get a hold of the ultra-thin<br>
> > > gauge cable.  Am I out of luck? Does anyone have any idea why this<br>
> > > might be happening?<br>
> > > _______________________________________________<br>
> > > Synth-diy mailing list<br>
> > > <a href="mailto:Synth-diy@synth-diy.org" target="_blank">Synth-diy@synth-diy.org</a><br>
> > > <a href="http://synth-diy.org/mailman/listinfo/synth-diy" rel="noreferrer" target="_blank">http://synth-diy.org/mailman/listinfo/synth-diy</a><br>
> > ><br>
> ><br>
> > Hi Youssef,<br>
> ><br>
> > Sounds like you may have a ground loop somewhere. It may be that the<br>
> > thinner cable has enough internal resistance to break the loop. If you<br>
> > can track down the source of the loop and fix it, you'll leave yourself<br>
> > free to use heavier gauge wire for the power connections.<br>
> ><br>
> > May two bits<br>
> ><br>
> > _______________________________________________<br>
> > Synth-diy mailing list<br>
> > <a href="mailto:Synth-diy@synth-diy.org" target="_blank">Synth-diy@synth-diy.org</a><br>
> > <a href="http://synth-diy.org/mailman/listinfo/synth-diy" rel="noreferrer" target="_blank">http://synth-diy.org/mailman/listinfo/synth-diy</a><br>
_______________________________________________<br>
Synth-diy mailing list<br>
<a href="mailto:Synth-diy@synth-diy.org" target="_blank">Synth-diy@synth-diy.org</a><br>
<a href="http://synth-diy.org/mailman/listinfo/synth-diy" rel="noreferrer" target="_blank">http://synth-diy.org/mailman/listinfo/synth-diy</a><br>
</blockquote></div></div>