<div dir="auto"><div><br><br><div class="gmail_quote"><div dir="ltr" class="gmail_attr">ASSI wrote:<br></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">On Tuesday, July 16, 2019 6:14:53 PM CEST David G Dixon wrote:<br>
> It gets so hot you almost can't touch it.  So, I'd say, yeah.<br>
<br>
"So hot you almost can't touch it" is actually a rather precisely determined <br>
temperature, about 61°C for a contact time of 2s and 50°C for 10s of contact <br>
time with a digit.  With the junction temperature likely about 20K higher than <br>
that, this temperature is well within the specifications for consumer IC, so <br>
no, I don't expect any appreciable reduction in lifetime from temperature <br>
alone.<br></blockquote></div></div><div dir="auto"><br></div><div dir="auto">The old SSM2164 is specified to an abs.max junction temperature of 150C and allowing worst case power and a DIP package would put the maximum allowed case temperature at 130C.  That would leave a burn mark on the end of your finger.</div><div dir="auto"><br></div><div dir="auto">Neil</div><div dir="auto"><br></div></div>