<html>
<head>
<meta http-equiv="Content-Type" content="text/html;
charset=windows-1252">
</head>
<body text="#000000" bgcolor="#FFFFFF">
<p>Yes, DG4xxLDY is the low voltage version - DG4XXDY is the
required! <br>
(DY being SOIC version, I think)</p>
<p>I've used DG412 within VCOs for adding range switch and simple
sync - I mean, you have 4 sections so you've got some options to
play with.<br>
If just wishing to switch in a cap then consider the DG417/8 which
are single SPST (NO or NC) or the DG419 which is a single SPDT.</p>
<p>None are particularly cheap, but I like them a lot.<br>
Oh, that reminds me - Coolaudio do the V411 (clone of DG411) -
similar to DG412 but with inverted switch behaviour.<br>
</p>
<div class="moz-cite-prefix">On 19/02/2019 17:46, Tim Ressel wrote:<br>
</div>
<blockquote type="cite"
cite="mid:2ace1cc8-e10f-74ca-0e8d-4f296712b939@circuitabbey.com">
<meta http-equiv="Content-Type" content="text/html;
charset=windows-1252">
<p>I have used the DG408 and the DG406 (16 channel) switches and
they both worked great. But be warned: there are some DG type
parts out there that are not +/-12 or 15 volt compatible. Read
the datasheet carefully, make sure the part can do the power
range you need.</p>
<p>--timmers<br>
</p>
<div class="moz-cite-prefix">On 2/19/2019 9:41 AM, Jarno Verhoeven
wrote:<br>
</div>
<blockquote type="cite"
cite="mid:d670a6a0-b4e3-cd58-0c9b-2bd535a1d043@ziggo.nl">
<meta http-equiv="Content-Type" content="text/html;
charset=windows-1252">
<p>Yes, DG412 is the current p/n</p>
<p>There are a bunch of interesting parts in that family, I have
a few DG408 that I want to try some day.</p>
<p>Regards,</p>
<p>Jarno.</p>
<p><br>
</p>
<p><br>
</p>
<div class="moz-cite-prefix">Op 19-Feb-19 om 18:21 schreef mark
verbos:<br>
</div>
<blockquote type="cite"
cite="mid:B8E4BA6B-A427-49F6-BF46-93BDDCE5A8CB@gmail.com">
<meta http-equiv="Content-Type" content="text/html;
charset=windows-1252">
I use the DG212 all the time. Affordable, can run off of up to
+/-18v, will switch from 5 volts, fast, low on resistance
<div class=""><br class="">
</div>
<div class="">Mark</div>
<div class=""><br class="">
</div>
<div class=""><br class="">
<div class=""><br class="">
</div>
<div class=""><br class="">
</div>
<div class=""><br class="">
</div>
<div class=""><br class="">
<div><br class="">
<blockquote type="cite" class="">
<div class="">On Feb 19, 2019, at 3:12 AM, oren levy
<<a href="mailto:orenlevysticky@gmail.com"
class="" moz-do-not-send="true">orenlevysticky@gmail.com</a>>
wrote:</div>
<br class="Apple-interchange-newline">
<div class="">
<meta http-equiv="content-type" content="text/html;
charset=windows-1252" class="">
<div dir="auto" class="">Intersil�<strong
style="background-color: rgba(255, 255, 255,
0);" class="">CD22M3494SQ</strong><br class="">
<br class="">
<div dir="ltr" class=""><br class="">
<div class="">Oren Levy</div>
</div>
<div dir="ltr" class=""><br class="">
On Feb 18, 2019, at 17:59, Adrian Corston <<a
href="mailto:eidorian@aladan.net" class=""
moz-do-not-send="true">eidorian@aladan.net</a>>
wrote:<br class="">
<br class="">
</div>
<blockquote type="cite" class="">
<div dir="ltr" class="">DG4xx have a good
reputation.<br class="">
<br class="">
<br class="">
<blockquote class="atmailquote"><br class="">
----- Original Message -----<br class="">
<div id="origionalMessageFromField"
style="width:100%;display:inline;background:rgb(228,228,228);"
class="">
<div
style="display:inline;font-weight:bold;"
class="">From:</div>
"Mike Beauchamp" <<a
href="mailto:list@mikebeauchamp.com"
class="" moz-do-not-send="true">list@mikebeauchamp.com</a>></div>
<br class="">
<div id="origionalMessageToField"
style="display:inline;font-weight:bold;"
class="">To:</div>
"<a href="mailto:synth-diy@synth-diy.org"
class="" moz-do-not-send="true">synth-diy@synth-diy.org</a>"
<<a href="mailto:synth-diy@synth-diy.org"
class="" moz-do-not-send="true">synth-diy@synth-diy.org</a>><br
class="">
<div id="origionalMessageSentField"
style="display:inline;font-weight:bold;"
class="">Cc:</div>
<br class="">
<div
style="display:inline;font-weight:bold;"
class="">Sent:</div>
Mon, 18 Feb 2019 20:53:43 -0500<br class="">
<div id="origionalMessageSubjectField"
style="display:inline;font-weight:bold;"
class="">Subject:</div>
[sdiy] Something better than CD4066 to
switch CVs?<br class="">
<br class="">
<br class="">
Does anyone have any experience using chips
to switch multiple CV's? I <br class="">
have a recommendation to use CD4066, but was
wondering if maybe there's <br class="">
something more modern and appropriate.<br
class="">
<br class="">
My power supply is +/-15 and I intend to
switch signals from -5 to about <br
class="">
+11 and including ones intended to be
accurate 1v/oct pitch CV's.<br class="">
<br class="">
I was also thinking about using one of these
IC's to switch in an <br class="">
additional timing capacitor in a VCO circuit
(to send it into LFO land), <br class="">
but I'm wondering if I'd be compromising VCO
stability in any way by <br class="">
tying it to the switch IC.<br class="">
<br class="">
Mike<br class="">
<br class="">
<br class="">
<br class="">
_______________________________________________<br class="">
Synth-diy mailing list<br class="">
<a href="mailto:Synth-diy@synth-diy.org"
class="" moz-do-not-send="true">Synth-diy@synth-diy.org</a><br
class="">
<a
href="http://synth-diy.org/mailman/listinfo/synth-diy"
class="" moz-do-not-send="true">http://synth-diy.org/mailman/listinfo/synth-diy</a><br
class="">
<br class="">
</blockquote>
</div>
</blockquote>
<blockquote type="cite" class="">
<div dir="ltr" class=""><span class="">_______________________________________________</span><br
class="">
<span class="">Synth-diy mailing list</span><br
class="">
<span class=""><a
href="mailto:Synth-diy@synth-diy.org"
class="" moz-do-not-send="true">Synth-diy@synth-diy.org</a></span><br
class="">
<span class=""><a
href="http://synth-diy.org/mailman/listinfo/synth-diy"
class="" moz-do-not-send="true">http://synth-diy.org/mailman/listinfo/synth-diy</a></span><br
class="">
</div>
</blockquote>
</div>
_______________________________________________<br
class="">
Synth-diy mailing list<br class="">
<a href="mailto:Synth-diy@synth-diy.org" class=""
moz-do-not-send="true">Synth-diy@synth-diy.org</a><br
class="">
<a class="moz-txt-link-freetext"
href="http://synth-diy.org/mailman/listinfo/synth-diy"
moz-do-not-send="true">http://synth-diy.org/mailman/listinfo/synth-diy</a><br
class="">
</div>
</blockquote>
</div>
<br class="">
</div>
</div>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<pre class="moz-quote-pre" wrap="">_______________________________________________
Synth-diy mailing list
<a class="moz-txt-link-abbreviated" href="mailto:Synth-diy@synth-diy.org" moz-do-not-send="true">Synth-diy@synth-diy.org</a>
<a class="moz-txt-link-freetext" href="http://synth-diy.org/mailman/listinfo/synth-diy" moz-do-not-send="true">http://synth-diy.org/mailman/listinfo/synth-diy</a>
</pre>
</blockquote>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<pre class="moz-quote-pre" wrap="">_______________________________________________
Synth-diy mailing list
<a class="moz-txt-link-abbreviated" href="mailto:Synth-diy@synth-diy.org" moz-do-not-send="true">Synth-diy@synth-diy.org</a>
<a class="moz-txt-link-freetext" href="http://synth-diy.org/mailman/listinfo/synth-diy" moz-do-not-send="true">http://synth-diy.org/mailman/listinfo/synth-diy</a>
</pre>
</blockquote>
<pre class="moz-signature" cols="72">--
--Tim Ressel
Circuit Abbey
<a class="moz-txt-link-abbreviated" href="mailto:timr@circuitabbey.com" moz-do-not-send="true">timr@circuitabbey.com</a></pre>
<br>
<fieldset class="mimeAttachmentHeader"></fieldset>
<pre class="moz-quote-pre" wrap="">_______________________________________________
Synth-diy mailing list
<a class="moz-txt-link-abbreviated" href="mailto:Synth-diy@synth-diy.org">Synth-diy@synth-diy.org</a>
<a class="moz-txt-link-freetext" href="http://synth-diy.org/mailman/listinfo/synth-diy">http://synth-diy.org/mailman/listinfo/synth-diy</a>
</pre>
</blockquote>
<pre class="moz-signature" cols="72">--
BugBrand LTD
UK company No. 07199808
VAT No. GB 988 2629 57
1 Ninetree Hill
BRISTOL BS1 3SB
United Kingdom
<a class="moz-txt-link-abbreviated" href="http://www.bugbrand.co.uk">www.bugbrand.co.uk</a></pre>
<div id="DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2">
<br /><br />
<hr style='border:none; color:#909090; background-color:#B0B0B0; height: 1px; width: 99%;' />
<table style='border-collapse:collapse;border:none;'>
<tr>
<td style='border:none;padding:0px 15px 0px 8px'>
<a href="https://www.avg.com/internet-security">
<img border=0 src="https://static.avast.com/emails/avg-mail-stamp.png" alt="AVG logo" />
</a>
</td>
<td>
<p style='color:#3d4d5a; font-family:"Calibri","Verdana","Arial","Helvetica"; font-size:12pt;'>
This email has been checked for viruses by AVG antivirus software.
<br><a href="https://www.avg.com/internet-security">www.avg.com</a>
</p>
</td>
</tr>
</table>
<br />
<a href="#DAB4FAD8-2DD7-40BB-A1B8-4E2AA1F9FDF2" width="1" height="1"> </a></div></body>
</html>