<div dir="ltr"><div dir="ltr">On Wed, 26 Dec 2018 at 06:52, cheater00 cheater00 <<a href="mailto:cheater00@gmail.com">cheater00@gmail.com</a>> wrote:<br>> Given that metal patch cables could function as antennas and cause<br>> both cross talk and external signal pick up, one could also use<br><div>> multimode glass fiber and transmit signals this way.</div><div><br></div><div>Multimode fibre has a lower bound on the cable length. I haven't found a solid reference</div><div>for what that actually is, and I expect it differs across transceiver parts, but I've found a</div><div>LOT of stories of people being unable to get short runs to work and the solution being</div><div>longer fibres. One thread mentioned a Cisco recommendation of 2 metres — something</div><div>about needing a certain amount of attenuation to avoid damaging the hardware at the</div><div>receive end — which would be irritatingly long even in something the size of Keith</div><div>Emerson's Moog<br></div><div><br></div><div>Also glass fibre patch leads are pretty fragile. If you were filling a 48U rack with polysynth</div><div>modules and were only rarely going to change the patching it might be feasible, I suppose,</div><div>but a traditional "electronics+keys" polysynth format is not going to work well with fragile</div><div>2m patch cables dangling everywhere!</div><div><br></div><div>This thread reeks of <a href="https://en.wikipedia.org/wiki/XY_problem">https://en.wikipedia.org/wiki/XY_problem</a><br></div><div><br></div><div>John<br></div></div></div>