<div dir="ltr"><div>For turnkey stencil options specifically for paint: you should be able to get a small pre-burned silkscreen w/ frame for under $50 if you look around online, or a custom mylar stencil (as used on decorative stencils). </div><div><br></div><div>Mylar stencils + a sponge or foam brush will give you a nice clean image, and then depending on what paint you use you would probably want to clear coat the pedals for durability. You can also use enamel spray paint (Rustoleum, etc) with mylar stencils and if you aren't too heavy handed could probably get about 50 per sheet. There are a LOT of fun DIY options if you go down that path. You could even have stencils laser cut on metal locally which should offer more flexibility than PCB fabs at good rates. </div><div><br></div><div>With silk screen you would need to seek out ink that's appropriate for use on metals, but of course you don't need to design an actual stencil for those and can use any B&W/halftone image. </div><div><br></div><div>Both of those options should result in a much better image than a stencil from a PCB fab.</div><div><br></div><div>Nathan</div></div><div class="gmail_extra"><br><div class="gmail_quote">On Sun, Jul 29, 2018 at 9:14 PM, Miles Stevens <span dir="ltr"><<a href="mailto:milesstevens89@gmail.com" target="_blank">milesstevens89@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr">Hi,<div><br></div><div>With stencils being so cheap from all the usual PCB supplier, I was thinking today about trying them out for use as a basic stencil for painting pedal enclosures. Does anyone have any experience with abusing the stencils?</div><div><br></div><div>Cheers</div></div>
<br>______________________________<wbr>_________________<br>
Synth-diy mailing list<br>
<a href="mailto:Synth-diy@synth-diy.org">Synth-diy@synth-diy.org</a><br>
<a href="http://synth-diy.org/mailman/listinfo/synth-diy" rel="noreferrer" target="_blank">http://synth-diy.org/mailman/<wbr>listinfo/synth-diy</a><br>
<br></blockquote></div><br></div>