<div dir="ltr"><div>I also switched from Eagle to Altium (although the switch was because I became a hardware engineer at work, and they used Altium).</div><div><br></div><div>It took a month or so for me to change from swearing /at/ Altium to swearing /by/ Altium (and that was using it at work pretty much constantly). It was a bit of a pain that the company put me through an Altium training course about a month after I'd grown very familiar with it.<br></div><div><br></div><div>The (as mentioned) requirement to update the PCB from the schematic took a bit of getting used to, but it makes sense in a larger organisation where you have people who are dedicated to schematic capture, and others for PCB layout (as we had - although I'm fluent in both).</div><div><br></div><div>I still have Eagle 7.5 professional (Schematic + Layout - I never bothered with Autorouting), which I use for old projects (although Altium does have an importer).</div><div><br></div><div>Unfortunately (and, in some respects, fortunately), I was let go from my previous job, but they let me keep the Altium licence (since they decided not to make any more hardware) - and all the soldering kit they had (which was bought for me about 18 months beforehand). So I'm still using Altium at home - but that's mainly because of the 3D visualisation. Slight problem is that I'm stuck with 17.0 unless I spend $$$.<br></div><div><br></div><div>The only thing that I still have problems with is getting a PDF exported at 1:1 scale which imports nicely into my illustration program which I use to stick logos and merge several PCBs to a single file so I can easily expose them all a the same time. For some reason, while it looks okay on the screen, it just changes the scale. Eagle worked perfectly for this (so much so that I created a simple key press to set all the options to export as a PDF for top and bottom layers).</div><div><br></div><div>Other annoyances with Altium 17.0 (when compared with Eagle 7.5):</div><div><br></div><div>- Net labels aren't automatically named to the net you click on</div><div>- The drag of several components in schematic often causes oddities with the wires</div><div>- Dragging a package on the PCB doesn't move its connected traces</div><div>- Doesn't work very well with multiple monitors</div><div>- Searching libraries is a pain<br></div></div><br><div class="gmail_quote"><div dir="ltr">On Sat, 30 Jun 2018 at 00:14 MTG <<a href="mailto:grant@musictechnologiesgroup.com">grant@musictechnologiesgroup.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><br>
On 6/29/2018 3:48 PM, AlanP wrote:<br>
> <br>
> I've got an Eagle 7.5.0 licence for 160x100mm board size, and intend to <br>
> never ever upgrade to the subscription model.<br>
> <br>
<br>
I wonder if Eagle will offer a perpetual license version?  I hate the <br>
subscription model too. All that old software that the retrokids are <br>
playing with today... that should be a neat trick for the next <br>
generation with no media and no way to get the license to activate.<br>
<br>
GB<br>
_______________________________________________<br>
Synth-diy mailing list<br>
<a href="mailto:Synth-diy@synth-diy.org" target="_blank">Synth-diy@synth-diy.org</a><br>
<a href="http://synth-diy.org/mailman/listinfo/synth-diy" rel="noreferrer" target="_blank">http://synth-diy.org/mailman/listinfo/synth-diy</a><br>
</blockquote></div>