<div dir="ltr"><br><div class="gmail_extra"><br><div class="gmail_quote">On Wed, Jun 20, 2018 at 10:30 AM, Lloyd Abbott <span dir="ltr"><<a href="mailto:lloydabbott94@gmail.com" target="_blank">lloydabbott94@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr">What rails do you have available ? Have you considered a comparator IC (e.g. LM339) rather than using general purpose op-amps ?<div><br></div><div>If you have 0V, +5V and +15V rails, with an LM339 you can reference the comparator input side to the 0V and +15V rails and have the output side referenced to 0V and +5V. The datasheet has an example circuit using one pullup resistor and one cap per comparator.</div><div><br></div></div></blockquote><div><br></div><div><br></div><div>I was going to suggest this as well.  The 339 and its family are all open collector outputs, so you can use a pull up to any voltage you like, a rail or a reference voltage or whatever to get the swing you need and if necessary convert levels.</div></div></div></div>