<div dir="ltr">The way I do it is 2mm Aluminum, bent only on top and bottom, then I make wood sides. Much easier than trying to bend all 4 sides, and looks good too!  That's for the Chassis, then goes the panel, bolted to the wood sides and to L brackets attached to the aluminum chassis.</div><br><div class="gmail_quote"><div dir="ltr">On Tue, Jun 12, 2018 at 6:50 PM luther rochester <<a href="mailto:luther.rochester@gmail.com">luther.rochester@gmail.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">1.5mm aluminum should be fine for most panels, provided you have bends <br>
in the long side (which provides a lot of extra strength).<br>
<br>
Like you mentioned, you might not get good clean bends with those cheap <br>
brakes (benders) though; I haven't used one, but a good one is 200+ KG.<br>
<br>
As you If you want to be able to bend all 4 sides you need a box/pan <br>
brake, which is much more expensive.<br>
<br>
Also, depending on the brake you might be limited to how shallow you can <br>
make the box (the side shown by '?' here):<br>
<br>
+--------------------------------+<br>
|                                | <----?<br>
+-o-                          -o-+<br>
<br>
For example my, brake can only do about 40mm or larger for this side, <br>
provided you want two bends.<br>
<br>
If you're just doing one or two projects it might be worth finding a <br>
fabrication shop that will make it for you. It would probably end up <br>
being the same price or cheaper, and you might get better results.<br>
<br>
--<br>
luther<br>
<br>
<br>
<br>
<br>
On 6/9/18 5:25 AM, <a href="mailto:sleepy_dog@gmx.de" target="_blank">sleepy_dog@gmx.de</a> wrote:<br>
> Hey list.<br>
> <br>
> I just looked at some pictures of Moog synths like Model D, and even <br>
> more so, Voyager, again, and I must say I'm quite a fan of that kind of <br>
> case design and the fact you can tilt the upper part up to your liking, <br>
> and back in for less cumbersome transportation.<br>
> <br>
> Ok, apart from that, more generally: The upper part - metal case for <br>
> audio electronics, with front panel.<br>
> <br>
> Is that steel, or aluminum, or more importantly, whatever it is - <br>
> *could* you make that out of aluminum and it's be stable enough?<br>
> Probably only depends on the thickness. But I have no experience with <br>
> such things.<br>
> <br>
> So, is 1.5mm, or even 1.2mm, thickness of aluminum something that could <br>
> work decently for a case roughly Moog Voyager case sized? (I would be <br>
> willing "cheat" with some reinforcement bars here and there if that's <br>
> what it takes ;))<br>
> <br>
> Why 1.5mm (1.2) alu? Because that's the max thickness (for alu) handled <br>
> by the strongest of those manually operated sheet metal bending machines <br>
> that are fixed with a sturdy vice or such, for longer lengths it's only <br>
> 1,2mm. You turn a lever, presumably while making bear-like noises... <br>
> Well, those are floatnig around on ebay (here anyway) for 100...200 EUR, <br>
> depending on the max material length and thickness.<br>
> <br>
> <br>
> There you read my assumption - that one could bend parts of such a case <br>
> yourself. Perhaps not exactly like the Voyager - it looks like the upper <br>
> "5/6th of a box" are one part, or at least bent around two axes - they <br>
> would be in each others way if I tried that with such a contraption I <br>
> guess. And then just a plate at the bottom.<br>
> <a href="https://www.youtube.com/watch?v=ku0BdjNasko&t=2m32s" rel="noreferrer" target="_blank">https://www.youtube.com/watch?v=ku0BdjNasko&t=2m32s</a><br>
> But maybe one could bend two halves, one "grabs around" in vertical, the <br>
> other in horizontal direction? Not only bending sides/front/back, but <br>
> another slimmer rim, another 90 degrees, to drill holes into and fix the <br>
> other part onto.<br>
> <br>
> (if it's not displayed with monospace font at your end, too bad ;))<br>
> +--------------------------------+<br>
> |                                |<br>
> +-o-                          -o-+<br>
> <br>
> <br>
> Anyway, if it turns out that 1.5mm aluminum* is far too thin for this, <br>
> at least for that size, I may forget about DIYing here (for things of <br>
> that size anyway), as I don't think I'd buy something much more <br>
> expensive than said contraptions for this purpose.<br>
> <br>
> * no harder than, I think it was called "6061". Because that's something <br>
> I can actually route openings out of, with my weak China CNC router.<br>
> <br>
> <br>
> - Steve<br>
> <br>
> <br>
> _______________________________________________<br>
> Synth-diy mailing list<br>
> <a href="mailto:Synth-diy@synth-diy.org" target="_blank">Synth-diy@synth-diy.org</a><br>
> <a href="http://synth-diy.org/mailman/listinfo/synth-diy" rel="noreferrer" target="_blank">http://synth-diy.org/mailman/listinfo/synth-diy</a><br>
_______________________________________________<br>
Synth-diy mailing list<br>
<a href="mailto:Synth-diy@synth-diy.org" target="_blank">Synth-diy@synth-diy.org</a><br>
<a href="http://synth-diy.org/mailman/listinfo/synth-diy" rel="noreferrer" target="_blank">http://synth-diy.org/mailman/listinfo/synth-diy</a><br>
</blockquote></div><br clear="all"><div><br></div>-- <br><div dir="ltr" class="gmail_signature" data-smartmail="gmail_signature">Quincas Moreira<br>Test Pilot at VBrazil Modular</div>