<div dir="ltr">I have the impression that it's pretty widely used.  Very easy, I have a project with two of them about ready to hit the usual DIY outlets.  I had the impression that the sample input needed to be 5V, so I used an LM78L05 and a LM339 comparator pulled up with the 5V to do the sampling.<br><br>Also: don't measure your voltage directly from the hold cap, you'll drain it and wonder why your droop is so terrible.  << voice of experience ;-).<div><br></div><div>Pete</div><div><br></div></div><div class="gmail_extra"><br><div class="gmail_quote">On Thu, Jun 7, 2018 at 11:21 AM, Elain Klopke <span dir="ltr"><<a href="mailto:functionofform@gmail.com" target="_blank">functionofform@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr">Hey all,<div><br></div><div>In my poking around the internets for sample and hold circuits, I ran across the Texas Instruments LF398 monolithic sample and hold. It looks promising, +/-5 to +/-18V supply range, up to +/-18V input range, TTL and CMOS compatable logic input, all in a DIP8 package.</div><div><br></div><div>Does anyone have any experience with this chip?</div></div>
<br>______________________________<wbr>_________________<br>
Synth-diy mailing list<br>
<a href="mailto:Synth-diy@synth-diy.org">Synth-diy@synth-diy.org</a><br>
<a href="http://synth-diy.org/mailman/listinfo/synth-diy" rel="noreferrer" target="_blank">http://synth-diy.org/mailman/<wbr>listinfo/synth-diy</a><br>
<br></blockquote></div><br></div>