<div dir="ltr">If the small size requirement is to get into the mini XLR connectors, it's possible to ream the strain relief sleeve out to at least 5mm with a twist drill without significant loss of strength.  I've got 4.8mm star quad mic cable into mini XLRs without too much difficulty.<div><br></div><div>If you need small size for other reasons, a search on lavalier mic cable might prove helpful.  Mogami do a good range, but the cheapest is around 50c/foot.  </div><div><br></div><div>Steve</div><div><br></div><div><br></div><div><br></div></div><div class="gmail_extra"><br><div class="gmail_quote">On 25 May 2018 at 07:57, Busby Bergson <span dir="ltr"><<a href="mailto:busby.bergson@gmail.com" target="_blank">busby.bergson@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">Hi all-<br>
<br>
I've been searching for some mic cable, but I'm having a hard time<br>
meeting the criteria I'm looking for. Essentially, I would like it to<br>
be extremely flexible, thin, and cheap. A lot of the stuff I've been<br>
seeing is PVC-insulated and I suspect I need something with silicone.<br>
The only things I've found seem to be astronomically expensive. Any<br>
suggestions?<br>
______________________________<wbr>_________________<br>
Synth-diy mailing list<br>
<a href="mailto:Synth-diy@synth-diy.org">Synth-diy@synth-diy.org</a><br>
<a href="http://synth-diy.org/mailman/listinfo/synth-diy" rel="noreferrer" target="_blank">http://synth-diy.org/mailman/<wbr>listinfo/synth-diy</a><br>
</blockquote></div><br></div>