<div dir="ltr">I've been studying a few open source circuit designs for digital eurorack modules, and I've come across one that I'm having a little difficulty analyzing. It is for the 4ms spectral multiband resonator (SMR). In particular, I'm looking at circuits for the MORPHCV and SPREADCV inputs, which are on sheet 4 of the schematic (left hand side): <div><br></div><div><a href="https://github.com/4ms/SMR/blob/master/hardware/smr-1.0.1-schematic.pdf">https://github.com/4ms/SMR/blob/master/hardware/smr-1.0.1-schematic.pdf</a><div><br></div><div>I understand the basic parts of the circuit: the input passes through and op-amp buffer (gain=1), and the output is connected to a 5v source via a trim pot. The input to a microcontroller is clipped to an acceptable range [0, 3.3V] with two diodes. </div><div><br></div><div>I guess I'm having a bit of difficulty figuring out exactly what the voltage will be at the MORPHADC and SPREADADC pins. I tried to do some nodal analysis, but things weren't making sense to me.</div><div><br></div><div>My intuition is that this is some type of "summing circuit" (the current from the 5v source gets added to the current from the op-amp). If so, why wouldn't the designer have used a traditional op-amp summing circuit? What might be preferable about this configuration?</div><div><br></div><div>Thanks,<br>Corey</div><div><br></div><div><br></div></div></div>