<div dir="ltr"><div class="gmail_quote"><div dir="ltr">Hello to every one, I'm trying to repair this beautiful synth (first version with kenton midi mod) for a friend with no luck since now.<div>here's the problem.</div><div>If you engage the VCO1 or VCO2 switch then pull up the the range fader pitch start to bend down immediately even if is centre position.<br>Checked voltage rails +15 and -15 looks good on my DVM.</div><div>pitchbend pot is working, ad range fader are ok.</div><div>turning trimpots VR1 and VR2 has no effect on pitch range and if I check them I display a max range of 18kohm (should be 100k but maybe something in the circuit is lowering it), anyway I will replace it since looks really unstable wen you trim it.</div><div>Tr8 and D1 looks ok, Can IC1 or IC5 be the problem?<br>Vr9 doesn't exist in my board</div><div>pin 1 and 3 of all faders are inverted from schem i've got to real board.</div><div><br></div><div>Thanks for any help!</div><div><br></div></div>
</div><br></div>