<html><body>The black foam is conductive; the pink foam antistatic. You probably want the conductive.<div>Mouser pn 809-12250 works well.<br><br><br><br>-------- Original Message ----------<br><br>I've never had to buy this before, but my supplies are dwindling. I'm <br>
looking for the stuff you push DIP chips into for shipping. Preferably <br>
about 10mm or 3/8" thick. And I prefer pink over black because the <br>
black stuff seems to give off dust as you work with it, but this is not <br>
a deal breaker. Dimensions are not critical but I will end up cutting it <br>
into squares of maybe 5" x5" at the largest.<br><br>
The issue I'm having is that I don't want that super light stuff that's <br>
all bendy like cloth*. This is not for a static safe pet bed. :-)<br><br>
I want the stiffer stuff that the chip pins will go into rather than <br>
bounce off. Is there a particular material, density or some other name <br>
I should look for?<br>
_______________________________________________<br>
Synth-diy mailing list<br>
Synth-diy@synth-diy.org<br>
http://synth-diy.org/mailman/listinfo/synth-diy<br></div></body></html>