<div><div dir="auto">Are you really using 5532s there? Does it behave the same way with a FET op amp (e.g. TL07x or similar) instead? I would have thought the input bias current of a 5532 made it unsuitable for use as an integrator at all, and especially with a device like a 2164 which I understand is fussy about its current output. </div><div dir="auto"><br></div><div dir="auto">Guessing really...</div><br><div class="gmail_quote"><div>On Sat, 27 Jan 2018 at 16:30, Tim Ressel <<a href="mailto:timr@circuitabbey.com">timr@circuitabbey.com</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">Hi,<br>
<br>
Filters can be a pain. I've got one that is misbehaving. Here is a link<br>
to the schematic:<br>
<br>
<a href="https://www.dropbox.com/s/acjvwb17nmuok1n/PrismFilter.pdf?dl=0" rel="noreferrer" target="_blank">https://www.dropbox.com/s/acjvwb17nmuok1n/PrismFilter.pdf?dl=0</a><br>
<br>
At low CVs it filters fine, but as the freq cv hits around 2 volts the<br>
behavior gets odd. I start seeing a rising DC bias on all the outputs.<br>
At about 3 volts all the outputs rail positive.<br>
<br>
Any help is appreciated. Thanks for playing!<br>
<br>
--<br>
--Tim Ressel<br>
Circuit Abbey<br>
<a href="mailto:timr@circuitabbey.com" target="_blank">timr@circuitabbey.com</a><br>
<br>
_______________________________________________<br>
Synth-diy mailing list<br>
<a href="mailto:Synth-diy@synth-diy.org" target="_blank">Synth-diy@synth-diy.org</a><br>
<a href="http://synth-diy.org/mailman/listinfo/synth-diy" rel="noreferrer" target="_blank">http://synth-diy.org/mailman/listinfo/synth-diy</a><br>
</blockquote></div></div>