<div dir="ltr">I'm currently playing with some Odroid XU4 and HC1 single board computers. Smaller than an Arduino, but with an 8 core big.LITTLE ARM CPU (4 performance optimized cores, 4 power optimized cores) at 2GHz, 6 ARM Mali GPU cores, 2GB of RAM, gigabit Ethernet and costing about $50 each. Same CPU as a Galaxy S5 phone, I think. Times are moving on. I'm itching to try a musical application of these things -- I'm building a cluster of 20 of them as a strange maker project right now. :-)<br></div><div class="gmail_extra"><br><div class="gmail_quote">On Mon, Jan 8, 2018 at 1:55 PM, Tom Wiltshire <span dir="ltr"><<a href="mailto:tom@electricdruid.net" target="_blank">tom@electricdruid.net</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex">Of course, but not necessarily the way I suggested.<br>
<br>
Ingo’s point about the indirect addressing is very valid. Indirect addressing was one of the PICs weaker suits until fairly recently (improved a lot with the enhanced instruction set), and it still doesn’t compare to some of the stuff the old 6502 used to do. The pre- and post-indexed indirect addressing modes that the 6502 had would be hard to pull off in only 4 instructions, but you never know...there might be a way.<br>
<br>
The “simple” way is to throw some massively overspecced machine like a desktop PC at the task and run a full emulator in some higher level language running on top of a full OS. The number of wasted cycles in such a system required to make a multi-GHz multi-core processor act like an ancient eight bit wonder going not much faster than digital watch is enough to make me scream!! But it’d get the job done...<br>
<div class="HOEnZb"><div class="h5"><br>
> On 8 Jan 2018, at 18:43, David Bulog <<a href="mailto:d2ba@xtra.co.nz">d2ba@xtra.co.nz</a>> wrote:<br>
><br>
> So can Pink Tunes be reborn to run on a modern day OS ?<br>
>> On 9/01/2018, at 1:28 am, Tom Wiltshire <<a href="mailto:tom@electricdruid.net">tom@electricdruid.net</a>> wrote:<br>
>><br>
>> I wondered about this. Assuming a 6502 running at 2MHz, if I used a modern PIC with an instruction rate at 8MHz, if I could write equivalent macros for each of the 6502 instructions in 4 instructions or less, I could basically compile the old code for the new chip.<br>
>><br>
>> It’s almost (but not quite) an interesting enough challenge to warrant giving it a try. Maybe if I had more Sundays in the week.<br>
>><br>
>> Tom<br>
>><br>
>> ==================<br>
>>      Electric Druid<br>
>> Synth & Stompbox DIY<br>
>> ==================<br>
>><br>
>>> On 8 Jan 2018, at 07:30, David Bulog <<a href="mailto:d2ba@xtra.co.nz">d2ba@xtra.co.nz</a>> wrote:<br>
>>><br>
>>> John Titor came up because of a debate about  reusing 80’s assembly code  in modern day recreations of classics. we came to the conclusion that you would need to source all the original hardware for assembly code to be pratically useful :)<br>
>>><br>
>>>> On 8/01/2018, at 8:09 pm, Olav Martin Kvern <<a href="mailto:okvern@ix.netcom.com">okvern@ix.netcom.com</a>> wrote:<br>
>>>><br>
>>>> Colleagues,<br>
>>>><br>
>>>> re: "John Titor"<br>
>>>><br>
>>>> I've never been sure if "John Titor" was an internet hoax that the visual novel/anime series "Steins;Gate" made reference to, or whether the internet hoax was created as part of the marketing program for either work. Probably the former, but you never know.<br>
>>>><br>
>>>> Either way, not all red herrings are created equal.:-)<br>
>>>><br>
>>>> Thanks,<br>
>>>><br>
>>>> Ole<br>
>>>> ______________________________<wbr>_________________<br>
>>>> Synth-diy mailing list<br>
>>>> <a href="mailto:Synth-diy@synth-diy.org">Synth-diy@synth-diy.org</a><br>
>>>> <a href="http://synth-diy.org/mailman/listinfo/synth-diy" rel="noreferrer" target="_blank">http://synth-diy.org/mailman/<wbr>listinfo/synth-diy</a><br>
>>><br>
>>><br>
>>> ______________________________<wbr>_________________<br>
>>> Synth-diy mailing list<br>
>>> <a href="mailto:Synth-diy@synth-diy.org">Synth-diy@synth-diy.org</a><br>
>>> <a href="http://synth-diy.org/mailman/listinfo/synth-diy" rel="noreferrer" target="_blank">http://synth-diy.org/mailman/<wbr>listinfo/synth-diy</a><br>
>><br>
><br>
<br>
<br>
______________________________<wbr>_________________<br>
Synth-diy mailing list<br>
<a href="mailto:Synth-diy@synth-diy.org">Synth-diy@synth-diy.org</a><br>
<a href="http://synth-diy.org/mailman/listinfo/synth-diy" rel="noreferrer" target="_blank">http://synth-diy.org/mailman/<wbr>listinfo/synth-diy</a><br>
</div></div></blockquote></div><br><br clear="all"><br>-- <br><div class="gmail_signature" data-smartmail="gmail_signature">[s]</div>
</div>