<div dir="auto">Thanks. I searched switchcraft and found some washers with a ridge that goes inside the hole for the jack. They should work.<div dir="auto"><br></div><div dir="auto">Thanks to everyone for all the suggestions and links.</div></div><div class="gmail_extra"><br><div class="gmail_quote">On Nov 9, 2017 2:50 PM, "Dave Leith" <<a href="mailto:dave.leith@gmail.com">dave.leith@gmail.com</a>> wrote:<br type="attribution"><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr">Switchcraft makes a set of fiber washers (with inner molded ring for centering) designed for this purpose. I know for sure for 1/4 inch but perhaps for other sizes. i bought from Mouser or Digikey<br></div><div class="gmail_extra"><br><div class="gmail_quote">On Thu, Nov 9, 2017 at 11:01 AM, Quincas Moreira <span dir="ltr"><<a href="mailto:quincas@gmail.com" target="_blank">quincas@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div dir="ltr">One thing I've done for a midi connector using 3.5mm jack was make the panel hole larger, and use heat-shrink around the jack thread as well as a nylon washer</div><div class="gmail_extra"><div><div class="m_-2566280905868014260h5"><br><div class="gmail_quote">On Thu, Nov 9, 2017 at 12:43 PM, Dave Magnuson <span dir="ltr"><<a href="mailto:abide@dmdrafting.com" target="_blank">abide@dmdrafting.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><div link="blue" vlink="purple" lang="EN-US"><div class="m_-2566280905868014260m_1112708823507890767m_-7729868640470228668WordSection1"><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">I don’t know if I would trust paint as a long term solution.   If the jack ever loosened up it could easily scrape off a little paint<u></u><u></u></span></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"><u></u> <u></u></span></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">Is this an audio connection or CV?     Could you use a small audio isolation transformer?<u></u><u></u></span></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"><u></u> <u></u></span></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d">Dave Magnuson<u></u><u></u></span></p><p class="MsoNormal"><span style="font-size:11.0pt;font-family:"Calibri","sans-serif";color:#1f497d"><u></u> <u></u></span></p><p class="MsoNormal"><b><span style="font-size:10.0pt;font-family:"Tahoma","sans-serif"">From:</span></b><span style="font-size:10.0pt;font-family:"Tahoma","sans-serif""> Synth-diy [mailto:<a href="mailto:synth-diy-bounces@synth-diy.org" target="_blank">synth-diy-bounces@synt<wbr>h-diy.org</a>] <b>On Behalf Of </b>Mattias Rickardsson<br><b>Sent:</b> Thursday, November 9, 2017 12:53 PM<br><b>To:</b> Jacob Watters<br><b>Cc:</b> Synth DIY<br><b>Subject:</b> Re: [sdiy] Jack Shielding<u></u><u></u></span></p><div><div class="m_-2566280905868014260m_1112708823507890767h5"><p class="MsoNormal"><u></u> <u></u></p><div><p class="MsoNormal">Would painting the panel be an alternative?<u></u><u></u></p><div><p class="MsoNormal">I've seen it work on many thousands of USB devices that needed their boxy USB connector housing to be isolated from the edges of the rectangular hole in the metal casing of the product.<u></u><u></u></p></div><div><p class="MsoNormal"><u></u> <u></u></p></div><div><p class="MsoNormal">/mr<u></u><u></u></p></div><div><p class="MsoNormal"><u></u> <u></u></p></div></div><div><p class="MsoNormal"><span style="color:#1f497d"><br><br></span><u></u><u></u></p><div><p class="MsoNormal">Den 9 nov. 2017 5:56 em skrev "Jacob Watters" <<a href="mailto:jacobwatters@gmail.com" target="_blank">jacobwatters@gmail.com</a>>:<u></u><u></u></p><div><p class="MsoNormal">I have made something that uses a jack. One of the connections on the jack is attached to the outside and thread. In typical applications this is probably used as the ground. However, in my usage it is not the ground. I end up shorting out my circuit if I attach the jack to the panel.<u></u><u></u></p><div><p class="MsoNormal"><u></u> <u></u></p></div><div><p class="MsoNormal">Is there a product that exists to shield a jack in this sort of situation? I am currently using plastic wrap from my kitchen to shield it, but I would like a better solution.<u></u><u></u></p></div><div><p class="MsoNormal"><u></u> <u></u></p></div><div><p class="MsoNormal">Changing the configuration of the jack is not an option.<u></u><u></u></p></div><div><p class="MsoNormal"><u></u> <u></u></p></div><div><p class="MsoNormal">Thanks for your help.<u></u><u></u></p></div><div><p class="MsoNormal"><u></u> <u></u></p></div><div><p class="MsoNormal"><u></u> <u></u></p></div><div><p class="MsoNormal">Jacob Watters<u></u><u></u></p></div></div><p class="MsoNormal" style="margin-bottom:12.0pt"><br>______________________________<wbr>_________________<br>Synth-diy mailing list<br><a href="mailto:Synth-diy@synth-diy.org" target="_blank">Synth-diy@synth-diy.org</a><br><a href="http://synth-diy.org/mailman/listinfo/synth-diy" target="_blank">http://synth-diy.org/mailman/l<wbr>istinfo/synth-diy</a><u></u><u></u></p></div></div></div></div></div></div><br>______________________________<wbr>_________________<br>
Synth-diy mailing list<br>
<a href="mailto:Synth-diy@synth-diy.org" target="_blank">Synth-diy@synth-diy.org</a><br>
<a href="http://synth-diy.org/mailman/listinfo/synth-diy" rel="noreferrer" target="_blank">http://synth-diy.org/mailman/l<wbr>istinfo/synth-diy</a><br>
<br></blockquote></div><br><br clear="all"><div><br></div></div></div><span class="m_-2566280905868014260HOEnZb"><font color="#888888">-- <br><div class="m_-2566280905868014260m_1112708823507890767gmail_signature" data-smartmail="gmail_signature">Quincas Moreira<br>Test Pilot at VBrazil Modular</div>
</font></span></div>
<br>______________________________<wbr>_________________<br>
Synth-diy mailing list<br>
<a href="mailto:Synth-diy@synth-diy.org" target="_blank">Synth-diy@synth-diy.org</a><br>
<a href="http://synth-diy.org/mailman/listinfo/synth-diy" rel="noreferrer" target="_blank">http://synth-diy.org/mailman/l<wbr>istinfo/synth-diy</a><br>
<br></blockquote></div><br></div>
<br>______________________________<wbr>_________________<br>
Synth-diy mailing list<br>
<a href="mailto:Synth-diy@synth-diy.org">Synth-diy@synth-diy.org</a><br>
<a href="http://synth-diy.org/mailman/listinfo/synth-diy" rel="noreferrer" target="_blank">http://synth-diy.org/mailman/<wbr>listinfo/synth-diy</a><br>
<br></blockquote></div></div>