<div dir="ltr"><div class="gmail_extra"><div class="gmail_quote">On 26 October 2017 at 23:33, Bruno Afonso <span dir="ltr"><<a href="mailto:bafonso@gmail.com" target="_blank">bafonso@gmail.com</a>></span> wrote:<br><blockquote class="gmail_quote" style="margin:0px 0px 0px 0.8ex;border-left:1px solid rgb(204,204,204);padding-left:1ex">Is this a matter of tolerances? For example this is a known problem with lower quality xlr plugs and people still use neutrik when they want to be sure they won't run into this problem.</blockquote><div><br></div><div>Seems likely. Plug tolerances too. </div><div><br></div><div>I've noticed a huge difference between various 3.5mm jacks. The PJ302M/Lumberg 1503_12<br>jacks I use in most of my own modules feel much, much tighter than Thonkiconns (or the Cliff</div><div>jacks used by Elby/Doepfer that started this omnithread originally)</div><div><br></div><div>I don't know how the jacks I'm using will fare in the longer term. But many of my Doepfer A-100</div><div>modules — all of them acquired on the used gear market — feel decidedly well-used, and not</div><div>one of them has a dodgy jack (or a hint of any having been replaced)</div><div><br></div><div>John</div></div></div></div>