<div dir="ltr"><div>While there are two I2S interfaces, neither of them are fully accessible via the I/O connectors (both use wires that are only connected to the memories).<br><br></div>Shame - looked quite nice otherwise!<br><br><div class="gmail_quote"><div dir="ltr">On Thu, 11 May 2017 at 14:51 Scott Gravenhorst <<a href="mailto:music.maker@gte.net">music.maker@gte.net</a>> wrote:<br></div><blockquote class="gmail_quote" style="margin:0 0 0 .8ex;border-left:1px #ccc solid;padding-left:1ex"><br>
Ah, thanks for that.  One thing that pisses me off a bit is that it's still too uncommon for dev<br>
boards (like this one) to have an on board audio codec.  Thankfully, the Discovery board does.  I<br>
would think in these days where every product out there has a screen and sound that it would be<br>
imperative to put at least an audio codec on the board.  The advantage for me is that when<br>
developing driver code for a codec, it's comforting to know that the codec being placed there by<br>
the mfr would seem to indicate that it _should_ work and that if there's a problem - it's your code.<br>
<br>
I may purchase the SAM E70 board after looking at the datasheet, but I can see I'll have to<br>
jerry-rig a codec to some pins on the board - which will be SMD and having myopia plus presbyopia,<br>
that's a problem.  Perhaps there's a plug in board... (not with my luck)  I've not yet had luck<br>
coding I2S, but I can sharpen my chops on the Discovery board.  At least the E70 board isn't<br>
expensive at about $30usa.  I'll need to determine what the difference is between S70 and E70.  The<br>
S70 chip is the one used for the Tsunami Super WAV Trigger board.<br>
<br>
<a href="mailto:paula@synth.net" target="_blank">paula@synth.net</a> wrote:<br>
>Scott,<br>
><br>
>  You should take a look at this eval board for the SAM E70 -<br>
><br>
><a href="https://www.digikey.co.uk/product-detail/en/microchip-technology/ATSAME70-XPLD/ATSAME70-XPLD-ND/5725743" rel="noreferrer" target="_blank">https://www.digikey.co.uk/product-detail/en/microchip-technology/ATSAME70-XPLD/ATSAME70-XPLD-ND/5725743</a><br>
<br>
><br>
>  has a nice fast M7 CPU and a big chunk of RAM too ;)<br>
><br>
>Paula<br>
><br>
>On 2017-05-11 12:30, Scott Gravenhorst wrote:<br>
>> Well, to be honest, I started looking at Microchip's (Atmel)<br>
>> ATSAMS70N20 which includes<br>
>> almost identical internal features.  It has a bit more internal RAM,<br>
>> but the datasheet<br>
>> says it runs up to 300 MHz.  The ARM on the 32F746GDISCOVERY board<br>
>> runs up to 216 MHz.<br>
>> However, I've not been able to find a dev board for the ATSAMS70N20.<br>
>><br>
>> So I have to say that this Discovery board is my second choice and<br>
>> will be a super-major<br>
>> step up from a dsPIC.  As for performance, I'll just have to see how<br>
>> much synth I can<br>
>> cram into it.  One interesting thing about both of the ARM ICs is that<br>
>> they have a 2<br>
>> channel 12 bit DAC that runs up to 1 MHz sample rate which might be<br>
>> fun with naive<br>
>> waveforms since the Nyquist limit is 500 kHz.  I've worked with a 12<br>
>> bit DAC at that<br>
>> sample rate using an FPGA and I noticed no alias problems with naive<br>
>> waveforms.<br>
>> However, such a high sample rate will limit voice and feature count.<br>
>><br>
>> Anyway, I'll post about it once I've got a good feel for what it can<br>
>> do.  All I have<br>
>> right now is a bunch of PDF files.<br>
>><br>
>> Michael Zacherl <<a href="mailto:sdiy-mz01@blauwurf.info" target="_blank">sdiy-mz01@blauwurf.info</a>> wrote:<br>
>>><br>
>>> On 11.May 2017, at 3:44 , Scott Gravenhorst <<a href="mailto:music.maker@gte.net" target="_blank">music.maker@gte.net</a>><br>
>>> wrote:<br>
>>><br>
>>>> I got some birthday money and bought this: 32F746GDISCOVERY<br>
>>>> =<br>
>>><br>
>>>> It looks pretty nice.  I will try Audio Weaver when the board comes<br>
>>>> here.<br>
>>><br>
>>> at this price ($49 really?) it looks like a steal!<br>
>>> How you=92d rank the cpu performance-wise?<br>
>>> Additional I/O via SPI? (still thinking dc-coupled audio rate A/D D/A)<br>
>>><br>
>>> --<br>
>>> <a href="http://mz.klingt.org" rel="noreferrer" target="_blank">http://mz.klingt.org</a><br>
>>><br>
>>><br>
>>> _______________________________________________<br>
>>> Synth-diy mailing list<br>
>>> <a href="mailto:Synth-diy@synth-diy.org" target="_blank">Synth-diy@synth-diy.org</a><br>
>>> <a href="http://synth-diy.org/mailman/listinfo/synth-diy" rel="noreferrer" target="_blank">http://synth-diy.org/mailman/listinfo/synth-diy</a><br>
>>><br>
>><br>
>> -- ScottG<br>
>> ________________________________________________________________________<br>
>> -- Scott Gravenhorst<br>
>> -- <a href="http://scott.joviansynth.com/" rel="noreferrer" target="_blank">http://scott.joviansynth.com/</a><br>
>> -- When the going gets tough, the tough use the command line.<br>
>> -- Matt 21:22<br>
>><br>
>> _______________________________________________<br>
>> Synth-diy mailing list<br>
>> <a href="mailto:Synth-diy@synth-diy.org" target="_blank">Synth-diy@synth-diy.org</a><br>
>> <a href="http://synth-diy.org/mailman/listinfo/synth-diy" rel="noreferrer" target="_blank">http://synth-diy.org/mailman/listinfo/synth-diy</a><br>
><br>
<br>
-- ScottG<br>
________________________________________________________________________<br>
-- Scott Gravenhorst<br>
-- <a href="http://scott.joviansynth.com/" rel="noreferrer" target="_blank">http://scott.joviansynth.com/</a><br>
-- When the going gets tough, the tough use the command line.<br>
-- Matt 21:22<br>
<br>
_______________________________________________<br>
Synth-diy mailing list<br>
<a href="mailto:Synth-diy@synth-diy.org" target="_blank">Synth-diy@synth-diy.org</a><br>
<a href="http://synth-diy.org/mailman/listinfo/synth-diy" rel="noreferrer" target="_blank">http://synth-diy.org/mailman/listinfo/synth-diy</a><br>
</blockquote></div></div>