Hi everyone,<div><br></div><div>I recently purchased an ms20 that was sawed in half to be rackmounted, but abandoned as a project. I installed it into the rack, powered and wired it up, and revived it.</div><div><br></div><div>Everything seems to work perfectly except for the pitch tracking on the oscillators. I'm sending HZ/V out of an Elektron Analog Keys (the racked ms20 has no keyboard) and it's tracking in uneven intervals. I have calibrated both oscillators with a tuner.</div><div><br></div><div>I was wondering if anybody here had some recommendations on where and what to look for. I figure some of you might have seen this issue.</div><div><br></div><div>Thanks!</div><div>Doug</div>